[Nov-2022] Cisco 300-715 Test Engine PDF - All Free Dumps from Pass4sures
Get New 300-715 Certification – Valid Exam Dumps Questions
NEW QUESTION 22
An organization is implementing Cisco ISE posture services and must ensure that a host-based firewall is in place on every Windows and Mac computer that attempts to access the network They have multiple vendors' firewall applications for their devices, so the engineers creating the policies are unable to use a specific application check in order to validate the posture for this What should be done to enable this type of posture check?
- A. Enable the default application condition to identify the applications installed and validade the firewall app.
- B. Use a compound condition to look for the Windows or Mac native firewall applications.
- C. Use the file registry condition to ensure that the firewal is installed and running appropriately.
- D. Enable the default firewall condition to check for any vendor firewall application.
Answer: D
Explanation:
https://www.youtube.com/watch?v=6Kj8P8Hn7dY&t=109s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION 23
In which scenario does Cisco ISE allocate an Advanced license?
- A. high availability Administrator nodes
- B. guest services with dACL enforcement
- C. dynamic device profiling
- D. endpoint authorization using SGA enforcement
Answer: D
NEW QUESTION 24
An administrator is configuring TACACS+ on a Cisco switch but cannot authenticate users with Cisco ISE.
The configuration contains the correct key of Cisc039712287. but the switch is not receiving a response from the Cisco ISE instance What must be done to validate the AAA configuration and identify the problem with the TACACS+ servers?
- A. Conrm the authorization policies are correct using the test aaa authorization admin drop legacy command.
- B. Check for server reachability using the test aaa group tacacs+ admin <key> legacy command.
- C. Validate that the key value is correct using the test aaa authentication admin <key> legacy command.
- D. Test the user account on the server using the test aaa group radius server CUCS user admin pass <key> legacy command.
Answer: B
Explanation:
Explanation
https://medium.com/training-course-ccna-security-210-260/ccna-security-part-3-implementing-aaa-in-cisco-ios-4
NEW QUESTION 25
Refer to the exhibit.
An organization recently implemented network device administration using Cisco ISE. Upon testing the ability to access all of the required devices, a user in the Cisco ISE group IT Admins is attempting to login to a device in their organization's finance department but is unable to. What is the problem?
- A. The authorization policy doesn't correctly grant them access to the finance devices.
- B. The IT training rule is taking precedence over the IT Admins rule.
- C. The finance location is not a condition in the policy set.
- D. The authorization conditions wrongly allow IT Admins group no access to finance devices.
Answer: A
NEW QUESTION 26
A network administrator is configuring client provisioning resource policies for client machines and must ensure that an agent pop-up is presented to the client when attempting to connect to the network Which configuration item needs to be added to allow for this'?
- A. a temporal agent that gets installed onto the system
- B. the client provisioning URL in the authorization policy
- C. an API connection back to the client
- D. a remote posture agent proxying the network connection
Answer: D
NEW QUESTION 27
An administrator for a small network is configuring Cisco ISE to provide dynamic network access to users. Management needs Cisco ISE to not automatically trigger a CoA whenever a profile change is detected. Instead, the administrator needs to verify the new profile and manually trigger a CoA. What must be configuring in the profiler to accomplish this goal?
- A. Session Query
- B. No CoA
- C. Port Bounce
- D. Reauth
Answer: B
Explanation:
Explanation
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-policies
NEW QUESTION 28
A network engineer is configuring guest access and notices that when a guest user registers a second device for access, the first device loses access What must be done to ensure that both devices for a particular user are able to access the guest network simultaneously?
- A. Use a custom portal to increase the number of logins
- B. Modify the guest type to increase the number of maximum devices
- C. Create an Adaptive Network Control policy to increase the number of devices
- D. Configure the sponsor group to increase the number of logins.
Answer: B
Explanation:
Explanation
https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/security/ise/2-7/admin_guide
NEW QUESTION 29
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
Explanation
Monitoring = provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service = provides network access, posture, guest access, client provisioning, and profiling services.
This persona evaluates the policies and makes all the decisions.
Administration = manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid = shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide
NEW QUESTION 30
Refer to the exhibit:
Which command is typed within the CU of a switch to view the troubleshooting output?
- A. show authentication registrations
- B. show authentication sessions mac 000e.84af.59af details
- C. show authentication sessions method
- D. show authentication interface gigabitethemet2/0/36
Answer: B
NEW QUESTION 31
What are two requirements of generating a single signing in Cisco ISE by using a certificate provisioning portal, without generating a certificate request? (Choose two )
- A. Select the certificate template
- B. Enter the IP address of the device
- C. Location the CSV file for the device MAC
- D. Choose the hashing method
- E. Enter the common name
Answer: A,E
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200534-ISE-2-0- Certificate-Provisioning-Portal.html
NEW QUESTION 32
What are two requirements of generating a single signing in Cisco ISE by using a certificate provisioning portal, without generating a certificate request? (Choose two )
- A. Select the certificate template
- B. Enter the IP address of the device
- C. Location the CSV file for the device MAC
- D. Choose the hashing method
- E. Enter the common name
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200534-ISE-2-0-Certificate-Provisioning-Portal.html
NEW QUESTION 33
Which two features must be used on Cisco ISE to enable the TACACS. feature? (Choose two)
- A. Command Sets
- B. External TACACS Servers
- C. Device Administration License
- D. Server Sequence
- E. Device Admin Service
Answer: C,E
NEW QUESTION 34
In which two ways can users and endpoints be classified for TrustSec?
(Choose Two.)
- A. VLAN
- B. dynamic
- C. QoS
- D. SGACL
- E. SXP
Answer: A,D
NEW QUESTION 35
A network administrator notices that after a company-wide shut down, many users cannot connect their laptops to the corporate SSID. What must be done to permit access in a timely manner?
- A. Connect this system as a guest user and then redirect the web auth protocol to log in to the network.
- B. Allow authentication for expired certificates within the EAP-TLS section under the allowed protocols.
- C. Add a certificate issue from the CA server, revoke the expired certificate, and add the new certificate in system.
- D. Authenticate the user's system to the secondary Cisco ISE node and move this user to the primary with the renewed certificate.
Answer: D
NEW QUESTION 36
Which two features must be used on Cisco ISE to enable the TACACS. feature? (Choose two)
- A. Enable Device Admin Service
- B. Command Sets
- C. External TACACS Servers
- D. Device Administration License
- E. Server Sequence
Answer: A,D
NEW QUESTION 37
An engineer is configuring Cisco ISE and needs to dynamically identify the network endpoints and ensure that endpoint access is protected. Which service should be used to accomplish this task?
- A. Profiling
- B. Guest access
- C. Client provisioning
- D. Posture
Answer: A
NEW QUESTION 38
A network administrator changed a Cisco ISE deployment from pilot to production and noticed that the JVM memory utilization increased significantly. The administrator suspects this is due to replication between the nodes What must be configured to minimize performance degradation?
- A. Ensure that Cisco ISE is updated with the latest profiler feed update
- B. Review the profiling policies for any misconfiguration
- C. Change the reauthenticate interval.
- D. Enable the endpoint attribute filter
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/admin_guide/b_ise_admin_guide_23/b_ise_admin_guide
NEW QUESTION 39
Which two default endpoint identity groups does Cisco ISE create? (Choose two )
- A. block list
- B. endpoint
- C. unknown
- D. profiled
- E. allow list
Answer: C,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide Default Endpoint Identity Groups Created for EndpointsCisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
Cisco ISE creates the following endpoint identity groups:
* Blacklist-This endpoint identity group includes endpoints that are statically assigned to this group in Cisco ISE and endpoints that are block listed in the device registration portal. An authorization profile can be defined in Cisco ISE to permit, or deny network access to endpoints in this group.
* GuestEndpoints-This endpoint identity group includes endpoints that are used by guest users.
* Profiled-This endpoint identity group includes endpoints that match endpoint profiling policies except Cisco IP phones and workstations in Cisco ISE.
* RegisteredDevices-This endpoint identity group includes endpoints, which are registered devices that are added by an employee through the devices registration portal. The profiling service continues to profile these devices normally when they are assigned to this group. Endpoints are statically assigned to this group in Cisco ISE, and the profiling service cannot reassign them to any other identity group.
* These devices will appear like any other endpoint in the endpoints list. You can edit, delete, and block these devices that you added through the device registration portal from the endpoints list in the Endpoints page in Cisco ISE. Devices that you have blocked in the device registration portal are assigned to the Blacklist endpoint identity group, and an authorization profile that exists in Cisco ISE redirects blocked devices to a URL, which displays "Unauthorised Network Access", a default portal page to the blocked devices.
* Unknown-This endpoint identity group includes endpoints that do not match any profile in Cisco ISE.
In addition to the above system created endpoint identity groups, Cisco ISE creates the following endpoint identity groups, which are associated to the Profiled identity group:
* Cisco-IP-Phone-An identity group that contains all the profiled Cisco IP phones on your network.
* Workstation-An identity group that contains all the profiled workstations on your network.
NEW QUESTION 40
A company is attempting to improve their BYOD policies and restrict access based on certain criteri a. The company's subnets are organized by building. Which attribute should be used in order to gain access based on location?
- A. MAC address
- B. IP address
- C. static group assignment
- D. device registration status
Answer: D
NEW QUESTION 41
An engineer is working with a distributed deployment of Cisco ISE and needs to configure various network probes to collect a set of attributes from the endpoints on the network.
Which node should be used to accomplish this task?
- A. monitoring
- B. pxGrid
- C. policy service
- D. primary policy administrator
Answer: C
Explanation:
Section: Profiler
NEW QUESTION 42
......
100% Passing Guarantee - Brilliant 300-715 Exam Questions PDF: https://www.pass4sures.top/CCNPSecurity/300-715-testking-braindumps.html
300-715 Dumps 2022 - NewCisco Exam Questions: https://drive.google.com/open?id=1B-5lJ-x5jJJWq1OchspDkwZM3EimnTxM