New Pass4sures 300-715 Exam Questions| Real 300-715 Dumps Updated on Sep 05, 2024
300-715 Braindumps – 300-715 Questions to Get Better Grades
To be eligible for the Cisco 300-715 certification exam, candidates must have a solid understanding of Cisco networking technologies and protocols, as well as experience in deploying and managing enterprise-level network security solutions. They should also have a thorough knowledge of identity and access management principles and be familiar with industry-standard security frameworks.
Cisco 300-715 Certification Exam is a comprehensive test that covers a wide range of topics related to ISE deployment, configuration, and management. Candidates are expected to have a solid understanding of network security principles, access control policies, and authentication and authorization protocols. They must also be able to troubleshoot common ISE-related issues and have a good understanding of network infrastructure components such as switches, routers, and firewalls. Passing the Cisco 300-715 exam is an important milestone for IT professionals looking to advance their careers in network security and access control.
NEW QUESTION # 17
Which of these is not a method to obtain Cisco ISE profiling data?
- A. DNS
- B. HTTP
- C. RADIUS
- D. Netflow
- E. active scans
- F. SNMP query
Answer: E
NEW QUESTION # 18
An engineer is configuring static SGT classification. Which configuration should be used when authentication is disabled and third-party switches are in use?
- A. VLAN to SGT mapping
- B. IP Address to SGT mapping
- C. Subnet to SGT mapping
- D. L3IF to SGT mapping
Answer: B
Explanation:
https://community.cisco.com/t5/security-knowledge-base/segmentation-strategy/ta-p/3757424: "The method of sending out IP to SGT mappings from ISE is particularly useful if the access switch does not support TrustSec"
NEW QUESTION # 19
Refer to the exhibit
Which switch configuration change will allow only one voice and one data endpoint on each port?
- A. Multi-auth to single-auth
- B. Mab to dot1x
- C. Auto to manual
- D. Multi-auth to multi-domain
Answer: D
Explanation:
https://community.cisco.com/t5/network-access-control/cisco-ise-multi-auth-or-multi-host/m-p/3750907
NEW QUESTION # 20
What is the minimum certainty factor when creating a profiler policy?
- A. the maximum number that a predefined condition provides
- B. the maximum number that a device certainty factor must reach to become a member of the profile
- C. the minimum number that a device certainty factor must reach to become a member of the profile
- D. the minimum number that a predefined condition provides
Answer: C
Explanation:
Section: Profiler
NEW QUESTION # 21
An administrator is attempting to replace the built-in self-signed certificates on a Cisco ISE appliance. The CA is requesting some information about the appliance in order to sign the new certificate. What must be done in order to provide the CA this information?
- A. Download the CA server certificate.
- B. Install the Root CA and intermediate CA.
- C. Download the intermediate server certificate.
- D. Generate the CSR.
Answer: D
NEW QUESTION # 22
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION # 23
Which Cisco ISE deployment model provides redundancy by having every node in the deployment configured with the Administration. Policy Service, and Monitoring personas to protect from a complete node failure?
- A. dispersed
- B. hybrid
- C. distributed
- D. two-node
Answer: D
NEW QUESTION # 24
Which permission is common to the Active Directory Join and Leave operations?
- A. Search Active Directory to see if a Cisco ISE machine account already exists.
- B. Set attributes on the Cisco ISE machine account.
- C. Remove the Cisco ISE machine account from the domain.
- D. Create a Cisco ISE machine account in the domain if the machine account does not already exist.
Answer: A
Explanation:
Section: Policy Enforcement
NEW QUESTION # 25
The IT manager wants to provide different levels of access to network devices when users authenticate using TACACS+. The company needs specific commands to be allowed based on the Active Directory group membership of the different roles within the IT department. The solution must minimize the number of objects created in Cisco ISE. What must be created to accomplish this task?
- A. multiple shell profiles and one command set
- B. multiple shell profiles and multiple command sets
- C. one shell profile and one command set
- D. one shell profile and multiple command sets
Answer: D
NEW QUESTION # 26
Which type of identity store allows for creating single-use access credentials in Cisco ISE?
- A. Local
- B. RSA SecurID
- C. PKI
- D. OpenLDAP
Answer: B
NEW QUESTION # 27
A network engineer has been tasked with enabling a switch to support standard web authentication for Cisco ISE. This must include the ability to provision for URL redirection on authentication Which two commands must be entered to meet this requirement? (Choose two)
- A. Ip http secure-server
- B. Ip http redirection
- C. Ip http server
- D. Ip http authentication
- E. Ip http secure-authentication
Answer: A,C
Explanation:
https://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3.2_0_se/multibook/configuration_guide/b_consolidated_config_guide_3850_chapter_0111001.html
NEW QUESTION # 28
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION # 29
Drag and drop the description from the left onto the protocol on the right that is used to carry out system authentication, authentication, and accounting.
Answer:
Explanation:
https://www.mbne.net/tech-notes/aaa-tacacs-radius
NEW QUESTION # 30
Which two external identity stores support EAP-TLS and PEAP-TLS? (Choose two.)
- A. RADIUS Token
- B. LDAP
- C. RSA SecurlD
- D. Active Directory
- E. Internal Database
Answer: B,D
NEW QUESTION # 31
An engineer is implementing Cisco ISE and needs to configure 802.1X. The port settings are configured for port-based authentication. Which command should be used to complete this configuration?
- A. dot1x system-auth-control
- B. aaa authentication dot1x default group radius
- C. dot1x pae authenticator
- D. authentication port-control auto
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/31sg/configuration/guide/conf/dot1x.
NEW QUESTION # 32
Which two values are compared by the binary comparison (unction in authentication that is based on Active Directory?
- A. user-presented certificate and a certificate stored in Active Directory
- B. subject alternative name and the common name
- C. MS-CHAPv2 provided machine credentials and credentials stored in Active Directory
- D. user-presented password hash and a hash stored in Active Directory
Answer: B,C
Explanation:
Explanation
Basic certificate checking does not require an identity source. If you want binary comparison checking for the certificates, you must select an identity source. If you select Active Directory as an identity source, subject and common name and subject alternative name (all values) can be used to look up a user.
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_01110.html
NEW QUESTION # 33
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION # 34
What service can be enabled on the Cisco ISE node to identify the types of devices connecting to a network?
- A. MAB
- B. central web authentication
- C. posture
- D. profiling
Answer: D
Explanation:
Section: Profiler
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/ b_ise_admin_guide_20_chapter_010100.html
NEW QUESTION # 35
An employee must access the internet through the corporate network from a new mobile device that does not support native supplicant provisioning provided by Cisco ISE. Which portal must the employee use to provision to the device?
- A. BYOD
- B. Personal Device
- C. My Devices
- D. Client Provisioning
Answer: C
NEW QUESTION # 36
......
300-715 Exam Dumps - Try Best 300-715 Exam Questions: https://www.pass4sures.top/CCNPSecurity/300-715-testking-braindumps.html
Get New 300-715 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1GoxI0YGC6NQgYOO93sJOokS54zQ_A879