A fully updated 2022 300-810 Exam Dumps exam guide from training expert Pass4sures
Provides complete coverage of every objective on exam and exam preparation 300-810
Implementing Cisco Collaboration Applications (300-810) certified professional salary
- India: 688,237 INR
- England: 50,025 Pound
- United States: 65,404 USD
- Europe: 59,321 Euro
NEW QUESTION 25
Refer to the exhibit.
A collaboration engineer has integrated Cisco Unity Express with Cisco Unified Communications Manager Express and is experimenting with the MWI feature. With the current configuration, no MWI change occurs when leaving new messages or after playing new messages. Which two changes are needed to correct the configuration? (Choose two.)
- A. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport tcp notify - B. ccn subsystem sip
mwi sub-notify - C. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport udp unsolicited - D. ccn subsystem sip
mwi envelop-info - E. ccn subsystem sip
mwi sip outcall - F. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.254 expires 3600 port 5060 transport udp
Answer: D,F
NEW QUESTION 26
Which entity is a standard component used for authentication by SAML 2.0?
- A. session broker
- B. Internet service provider
- C. client access server
- D. identity provider
Answer: D
NEW QUESTION 27
Refer to the exhibit. After receiving a new desk phone, the Jabber user can no longer make calls via phone control. The help desk collected the user's Jabber problem report and verified that they the correct Cisco UCM CTI permissions. Which configuration must be changed to correct this issue?
- A. Verify that the Cisco UCM service profile has Cisco UCM CTI servers configured.
- B. Verify that the device line configuration has Allow Control of Device from CTI enabled.
- C. Verify that the user's desk phone device is listed as a controlled device in the Cisco UCM end user configuration
- D. Verify that the desk phone device has Allow Control of Device from CTI enabled.
Answer: D
NEW QUESTION 28
Refer to the exhibit.
Which two steps resolve the "Users with Duplicate User IDs" message? (Choose two.)
- A. Assign the duplicate user to the secondary Cisco IM and Presence node.
- B. Rename the directory URI value for one of the users to ensure that there is no duplication.
- C. Rename the User ID value for one user if different users on different clusters have the same User ID assigned.
- D. Delete the user ID for the duplicate user ID.
- E. Unassign a user from one of the clusters when the same user is assigned to two different clusters.
Answer: C,E
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/ configAdminGuide/10_0_1/CUP0_BK_C318987B_00_config-admin-guide-imp-100/ CUP0_BK_C318987B_00_config-admin-guide-imp-100_chapter_010101.html
NEW QUESTION 29
What are two Cisco Jabber 12.6 on-premises deployment types that can be run on a Windows-enabled PC?
(Choose two.)
- A. multicloud-based
- B. Contact Center Agent
- C. Full UC
- D. cloud-based
- E. IM-only
Answer: C,E
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_6/cjab_b_on-prem-deployment- cisco-jabber_12-6.pdf
NEW QUESTION 30
Refer to the exhibit.
Which end-user option can resolve this issue?
- A. Standard CTI Reception of SRTP Key Material
- B. Standard CTI Allow Control of Phones Supporting Rollover Mode
- C. Standard CTI Allow Call Monitoring
- D. Standard CTI Allow Calling Number Modification
Answer: B
NEW QUESTION 31
Refer to the exhibit. A collaboration engineer restored a failed primary node of an active/standby IM and presence subcluster. The engineer notices that users fallback to the node occurred. Which action resolves this issue?
- A. Wait for the primary node to establish 30 minutes of uptime
- B. Set the Keep-Alive (Heartbeat) interval to 15.
- C. Reboot the primary node
- D. Modify the Client Re-Login Limits
Answer: A
NEW QUESTION 32
Which DNS record is used for on-premises service by Jabber clients?
- A. _cisco-uds._tcp.<domain> SRV record
- B. <tftp server FQDN> A record
- C. _collab-edge._tcp.<domain> SRV record
- D. _cisco-uds._tls.<domain> SRV record
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/ CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns- configuration-guide_chapter_010.html
NEW QUESTION 33
Refer to the exhibit.
An administrator is troubleshooting an issue with XMPP Federation between two. eight-node IM and Presence clusters. After looking at the logs, the administrator finds this message and must publish one or more DNS SRV records containing one or more addresses of the IM and Presence node(s). How many nodes must be selected to publish?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 34
Which CLI command is used to collect traces from the Cisco Presence engine for seven days?
- A. file build log presence_engine 7
- B. file build log cisco_presence 168
- C. file build log presence_engine 168
- D. file build log cisco_presence_engine 7
Answer: D
NEW QUESTION 35
Refer to the exhibit. An engineer assists a user who reports that the voicemall notifications show correctly on the desk phone are not available in the jabber client. Which action resolves this issue?
- A. Ensure that the voicemail server is listed in the user's CTI profile
- B. Set the voicemail profile on the user's line on the CSF device.
- C. Configure the voicemail profile on the user's service profile
- D. Reset the Jabber client and have the user sign in again
Answer: C
NEW QUESTION 36
An administrator is setting up the Cisco Unified IM and Presence on-premises high availability feature and wants the Server Recovery Manager to initiate failover after 90 seconds. However, failover is happening after 60 seconds How is this issue corrected?
- A. Change keep Alive (Heartbeat) Timeout to 90 seconds.
- B. Change Keep Alive (Heartbeat) Interval to 90 seconds
- C. Change critical service delay to 90 seconds.
- D. Change peer Heartbeat Timeout to 90 seconds.
Answer: A
NEW QUESTION 37
Which component of SAML SSO defines the transport mechanism that is used to deliver the SAML messages between entities?
- A. assertions
- B. profiles
- C. metadata
- D. bindings
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 38
Refer to the exhibit.
An organization is moving from on-premise Exchange to Microsoft Office 365 for email and calendaring. The administrator would like to maintain meeting presence functionality in Jabber clients connected to Cisco IM and Presence after this move. Office 365 certificates must be installed to accomplish this. Which two trust stores should these certificates be uploaded to on Cisco IM and Presence? (Choose two.)
- A. xmpp-trust
- B. xmpp-fed-trust
- C. cup-trust
- D. cup-xmpp- trust
- E. tomcat-trust
Answer: B
NEW QUESTION 39
Refer to the exhibit.
Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?
- A. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
- B. The domain ccnp.cisco.com does not exist on the DNS server.
- C. The port specified on the SRV record is wrong.
- D. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
Answer: B
NEW QUESTION 40
Refer to the exhibit.
A collaboration engineer has integrated Cisco Unity Express with Cisco Unified Communications Manager Express and is experimenting with the MWI feature. With the current configuration, no MWI change occurs when leaving new messages or after playing new messages. Which two changes are needed to correct the configuration? (Choose two.)
- A. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport tcp notify - B. ccn subsystem sip
mwi envelop-info - C. ccn subsystem sip
mwi sub-notify - D. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport udp unsolicited - E. ccn subsystem sip
mwi sip outcall - F. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.254 expires 3600 port 5060 transport udp
Answer: D,E
NEW QUESTION 41
Refer to the exhibit.
Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?
- A. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
- B. The port specified on the SRV record is wrong.
- C. The domain ccnp.cisco.com does not exist on the DNS server.
- D. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
Answer: B
NEW QUESTION 42
Refer to the exhibit.
Cisco Unity Connection and Cisco Unified Communications Manager are integrated by using SCCP. The Voice Mail Ports are registered. Users report that calls fail when forwarded to voicemail. Which is a cause of the issue?
- A. The call forward and call pickup settings do not have a CSS on Forward All.
- B. The Voice Mail Pilot is not configured with a CSS that contains the INTERNAL_PT.
- C. The CSS on the Voice Mail Pilot is missing partitions for user phones.
- D. The Voice Mail Port partition on the CSS of the phone is missing.
Answer: C
NEW QUESTION 43
......
Topics Covered in the Exam
This test examines the candidate's knowledge regarding collaboration technology through the questions related to the four major domains. They involve all the core areas you need to know to become a skilled professional. Each domain has a specific percentage of the total content and comprises the following syllabus:
- Cisco Unity Connection and Cisco Unity Express
This domain also takes about 30% of the exam questions. It assesses one’s skills in configuring and troubleshooting call handlers, voicemails transmissions, routing rules, and more using Cisco Unity Connection. Other relevant parts of this domain include toll fraud prevention, Cisco Unity Express troubleshooting, and digital networking in Cisco Unity Connection.
- Application Clients
About 25% of the questions will come from this module. It requires you to understand how to configure and troubleshoot DNS for service discovery as well as Cisco Jabber voicemail integration, phone control, and client installation switches. You should also have a clear idea of the description of the Cisco Unified Attendant Console Advanced integration.
- Cisco Unified IM and Presence
About 30% of the test questions you'll meet will come from this section. To answer them correctly, you need to know the configuration procedure for Cisco Unified Instant Message and troubleshooting methods for Cisco Unified IM&P — both on-premises.
- Single Sign-On (SSO) for Collaboration Applications
This topic covers 15% of the exam questions. It requires you to know the various SSO types for collaboration and the SAML SSO login process flow based on Cisco Collaboration solutions. You'll also be tested on your familiarity with SAML components.
Tested Material Used To 300-810: https://www.pass4sures.top/CCNP-Collaboration/300-810-testking-braindumps.html
Steps Necessary To Pass The 300-810 Exam: https://drive.google.com/open?id=1WKojNexfYAr6LUYDbmyRD2kTolcSY8gX