Verified H31-341_V2.5 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump from Pass4sures
Pass HCIP Transmission H31-341_V2.5 Exam With 122 Questions
Huawei H31-341_V2.5 (HCIP-Transmission V2.5) certification exam is a highly sought-after qualification for professionals working in the telecommunications industry. HCIP-Transmission V2.5 certification is designed to validate the candidate's knowledge and skills in the field of transmission network planning, operation, and maintenance. H31-341_V2.5 exam covers a wide range of topics, including optical fiber transmission, packet transmission, microwave transmission, and access network technologies.
The H31-341_V2.5 exam covers a wide range of topics, including optical fiber transmission, microwave transmission, and PLC transmission. Candidates should have experience with the installation and maintenance of transmission equipment, as well as a solid understanding of transmission network planning, operation, and management. They should also be familiar with the latest industry standards and best practices.
NEW QUESTION # 33
Which of the following is a function of the TCM overhead in the ODUk signal?
- A. Path tracing identifier overhead
- B. General communication channel overhead
- C. Tandem Connection Monitoring Overhead
- D. Channel Monitoring Fee
Answer: C
NEW QUESTION # 34
1: N-linear multiplex section switching requires the APS switching protocol; equipment from different manufacturers may be different due to protocol processing, and may not be interconnected.
- A. False
- B. True
Answer: B
NEW QUESTION # 35
Which of the following modulation mode light sources has the best dispersion tolerance and stability?
- A. EA electroabsorption modulation light source
- B. Directly modulated light source
- C. NZ (Mach-Zehnder) modulated light source
- D. PDM-QPSK modulated light source
Answer: D
NEW QUESTION # 36
In actual WDM systems, systems with a rate of 10G and below are greatly affected by polarization mode dispersion.
- A. False
- B. True
Answer: A
NEW QUESTION # 37
Which of the following is the OPUk payload structure identification overhead?
- A. RES
- B. PSI
- C. PJO
- D. NJO
Answer: B
NEW QUESTION # 38
Which of the following descriptions about the requirements for fiber optic deployment is wrong?
- A. The connecting parts such as bare boards and flanges must be connected reliably
- B. Labels at both ends of the fiber are filled in correctly and clearly, in neat positions, and in the same direction
- C. There should be no forced pulling and unnatural bending of the optical fiber layout, and no other cables and objects are pressed on it after deployment
- D. Connection points should be clean
- E. The optical fiber is not free to twitch in the buckle
Answer: E
NEW QUESTION # 39
What are the main functions of LAG? (Multiple choice)
- A. Detection and notification of service access points and intermediate transport network failures
- B. Increase link capacity
- C. Improve link availability
Answer: A,B
NEW QUESTION # 40
In the troubleshooting scenario, which of the following descriptions about the channels for obtaining signal flow information is wrong?
- A. Network management, which can display the signal flow of the fixed network level, and provide corresponding alarm and performance information at the same time
- B. Wavelength allocation diagram, which can display detailed wavelength paths
- C. Network diagram of the entire network, used for segment division during fault location
- D. Fiber connection diagram, for a single station, is the actual fiber connection diagram within the site
Answer: B
NEW QUESTION # 41
A 2.2m cabinet can accommodate up to which of the following OSN 2500 subracks.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 42
The setting of alarm reversal is port-based.
- A. False
- B. True
Answer: B
NEW QUESTION # 43
In the troubleshooting scenario, in order to detect and locate abnormal optical power faults in a timely manner, which of the following descriptions about the matters that need attention in daily maintenance is correct? (Multiple choice)
- A. Regularly back up the optical power of each point
- B. Record the wavelength of each channel and the signal-to-noise ratio of each receiving point
- C. Master the typical values of input and output optical power of different types of OTU boards and optical amplifier boards
- D. Regularly back up the receiving and sending optical power of important boards
Answer: A,B,C,D
NEW QUESTION # 44
The main difference between the functional standardized optical transport unit OTUkV and the fully standardized optical transport unit OTUk lies in the allocation of FEC areas.
- A. False
- B. True
Answer: A
NEW QUESTION # 45
Which of the following light sources has the best dispersion tolerance and stability?
- A. None of the above
- B. EA modulated light source
- C. Mach-Zehnder modulated light source
- D. Directly modulated light source
Answer: C
NEW QUESTION # 46
What are the following steps for low-speed services to be multiplexed into high-speed SDH services? (Multiple choice)
- A. Mapping
- B. Positioning
- C. Multiplexing
- D. Overhead Insertion
Answer: A,B,C
NEW QUESTION # 47
Linear MSP (LMSP) has two modes: 1+1 and 1:1. Additional services can only be configured for the protection channel in the 1:1 mode of LMSP.
- A. False
- B. True
Answer: B
NEW QUESTION # 48
When using the LCAS function. Which of the following overhead bytes is used to transmit control information? (Multiple choice)
- A. M1
- B. K4
- C. K2
- D. H4
Answer: B,D
NEW QUESTION # 49
Which of the following IP addresses is not a private network IP address?
- A. 10.255.0.1
- B. 10.0.0.1
- C. 172.128.0.1
- D. 192.168.0.1
Answer: C
NEW QUESTION # 50
The () function of the 0A module of the EMR8 single board makes the system increase or decrease one or several channels or when the optical signal of some channels fluctuates, without affecting the signal gain of other channels.
Answer:
Explanation:
Gain Lock
NEW QUESTION # 51
Which of the following descriptions about 0TN frame structure overhead is wrong?
- A. FAS does not participate in scrambling
- B. FAS framing failure will generate OTUK_LOF
- C. The value of FAS changes dynamically with different signals
- D. FAS is located at the beginning of the OTN frame structure
Answer: C
NEW QUESTION # 52
......
Huawei H31-341_V2.5 exam covers a range of topics related to transmission networks, including system architecture, network design, equipment configuration, and maintenance. H31-341_V2.5 exam also covers topics related to optical fiber transmission, microwave transmission, and network synchronization. Candidates are expected to have a good understanding of transmission network technologies and have the ability to design and implement transmission solutions.
Ultimate Guide to Prepare Free H31-341_V2.5 Exam Questions and Answer: https://drive.google.com/open?id=145m_fn-rcJ_ssfVHCYR8TQJdg2rL6q6M
Pass H31-341_V2.5 Tests Engine pdf - All Free Dumps: https://www.pass4sures.top/HCIP-Transmission/H31-341_V2.5-testking-braindumps.html