The Best Practice Test Preparation for the C_TS413_2020 Certification Exam
C_TS413_2020 Exam Dumps, Practice Test Questions BUNDLE PACK
NEW QUESTION 37
You want to display vehicle-specific data for a piece of equipment. How do you proceed?
- A. Assign a view profile to an equipment category for fleet equipment.
- B. Assign a view profile to the combination of equipment category and vehicle class.
- C. Assign a view profile to the combination of fleet object type and equipment category.
- D. Define the field selection for the vehicle equipment master data.
Answer: C
NEW QUESTION 38
Which of the following is scheduling indicator? choose 1 answer
- A. time-latest date
- B. time-fixed date
- C. time-key date
- D. time-earliest date
Answer: C
NEW QUESTION 39
You create an equipement task list for piece of equipment without BOM assignment. How can you assign component to a task list operation of this equipement taks list? choose 1 answer
- A. - assign the header material of a mateiral BOM to the equipment taks list header
- select compoment from the BOM to the task list operation - B. - assign the BOM usage for free material assignement in customizing
- freely assign material as componenet to the task list operation - C. - manually assign the BOM usage to a task list header
- add component from the BOM to the task list operation - D. - assign the header material ofa material BOM as assembly to a task operation
- select components from the BOM to the task list operation
Answer: B
NEW QUESTION 40
The maintenance engineer creates a single cycle plan with a cyle of 12 months and enters the scheduling indicator time-key date.
Which further scheduling parameter must you enter so that the calcuated call date is always scheduled six months before the planned date? choose 1 answer
- A. enter an offset of six months
- B. enter a tolarance of 50 %
- C. enter a call horizon 50 %
- D. enter a scheduling period of six months
Answer: C
NEW QUESTION 41
Which parameter in a maintenance strategy do you use to set the start/end date of the maintenance order?
- A. Scheduling type
- B. Package offset
- C. Call horizon
- D. Initial/subsequent buffer
Answer: D
NEW QUESTION 42
Which of the following statements are correct?
- A. Overhead rates are used to allocate sales and administration overheads.
- B. Overheads on actual costs are determined automatically when the order is saved.
- C. Overhead rates enable you to allocate overhead costs to costaccounting objects according to cause.
- D. Overheads on planned costs are determined as part of the standard cost estimate.
Answer: A,C,D
NEW QUESTION 43
Which of the following is true about calculating the cost for maintenance?
- A. It is calculated at the Order operation level by default.
- B. The operation account assignment (OAA) business function allows to calculate costs of maintenance orders atoperation level.
- C. It is calculated at the Order header level by default.
- D. You can configure thesystem to calculate the cost at the header level in the ordertype customizing in SPRO.
Answer: B,C
NEW QUESTION 44
Which of the following parameters are available when you define a new maintenance plan category? Note: There are 3 correct answers to this question.
- A. Call object
- B. Completion date
- C. Order type
- D. Change documents
- E. Maintenance activity type
Answer: A,B,C
NEW QUESTION 45
During the implementation project you need to define the organizational units relevant for Plant Maintenance. Which of the following objects can you directly assign to a maintenance plant? Note:
There are 2 correct Answers to this question.
- A. Maintenance planner group
- B. Organizational unit
- C. Maintenance work center
- D. Storage location
Answer: C,D
NEW QUESTION 46
Which operations are possible when you cancel the technical completion of a maintenance order? Note:
There are 2 correct Answers to this question.
- A. Change the estimated costs.
- B. Change the priority.
- C. Book a goods receipt.
- D. Cancel status Released.
Answer: B,C
NEW QUESTION 47
What does the planner use to trigger the procurment of external service from a maintenance order? choose 1 answer
- A. special control key
- B. special maintenance activity type
- C. specialorder type
- D. special activity type
Answer: A
NEW QUESTION 48
Which material type is the best choice if you only want to create a structure element within the BOM?
- A. Manufacturer Part (HERS)
- B. Spare Part (ERSA)
- C. Compatible Unit (CBAU)
- D. Maintenance Assembly (IBAU)
Answer: D
NEW QUESTION 49
In which product does SAP deliver embedded analytics? choose 1 answer
- A. SAP BW/4HANA
- B. SAP Business warehouse
- C. SAP Business intellignece
- D. SAP S/4HANA
Answer: D
NEW QUESTION 50
How do you activate subscreen for equipement master data incustomizing? choose 1 answer
- A. create a screen group info type and assign the group to the equipment category
- B. create a view profile and assign it to the equipement category
- C. assign object information parameter to the equipement category
- D. define thefield selection for the equipment master data
Answer: B
NEW QUESTION 51
Why wasthe application code completely rewritten for SAP S/4HANA?
- A. SAP S/4HANA is now built with Java
- B. The optimized ABAP code that we developed for Suite on SAP HANA would not work with SAP S/4HANA
- C. To ensurethat the code is optimized for SAP HANA
- D. To take advantage of the simpler data model
Answer: C,D
NEW QUESTION 52
Which steps are available for the maintenance technician when using the Report Malfunction tile? Note: There are 3 correct answersto this question.
Prepare for the Actual SAP Certified Application Associate C_TS413_2020 Exam Practice Materials Collection: https://www.pass4sures.top/SAP-Certified-Application-Associate/C_TS413_2020-testking-braindumps.html