NACE-CIP2-001 Free Exam Questions and Answers PDF Updated on Feb-2024
Latest NACE-CIP2-001 Exam Dumps Recently Updated 100 Questions
NACE-CIP2-001 Exam is designed to test candidates on their knowledge of coating inspection techniques, including surface preparation, coating application, and coating inspection. NACE-CIP2-001 exam covers a wide range of topics, including the properties of coatings, coating types and applications, coating specifications, and coating inspection procedures. Candidates must also demonstrate their ability to interpret and apply various industry standards, such as ASTM and SSPC.
NACE-CIP2-001 (Coating Inspector Level 2) Exam is a widely recognized assessment in the field of corrosion prevention and control. NACE-CIP2-001 exam is designed to test the proficiency of professionals in the coating industry and validate their knowledge in the inspection, evaluation, and documentation of surface preparation and coating application. Successful completion of NACE-CIP2-001 exam grants the Coating Inspector Level 2 certification, which is highly valued in the industry.
To be eligible to take the NACE-CIP2-001 exam, candidates must have a minimum of two years of experience in coating inspection, and must have completed NACE-CIP1 (Coating Inspector Level 1) certification. NACE-CIP2-001 exam consists of 135 multiple-choice questions and lasts for 6 hours. It covers a wide range of topics, including surface preparation, coating application, inspection techniques, corrosion control, and health and safety.
NEW QUESTION # 10
Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide if and when a destructive test is required.
- A. False
- B. True
Answer: A
NEW QUESTION # 11
It is always possible to see moisture on a steel substrate:
- A. False
- B. True
Answer: A
NEW QUESTION # 12
As a NACE Level 2 Inspector on a field job; prior to submission your documentation should always reviewed and approved by:
- A. A NACE Level 1 Inspector
- B. A NACE Protective Coating Specialist
- C. Another NACE Level 2 Inspector
- D. A NACE Level 3 Inspector
Answer: D
NEW QUESTION # 13
Inspection and Test Plans are provided to:
- A. Outline the inspection steps, sequencing and pass/fail criteria
- B. To supersede the requirements of the product data sheets
- C. So the Inspector doesn't have to read the entire specification
- D. So the contractor has a single document to reference
Answer: A
NEW QUESTION # 14
From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is:
- A. Cost
- B. Safety
- C. Iron content
- D. Appearance
Answer: C
NEW QUESTION # 15
You are NACE Level 2 Inspector working on a tank lining job where a mobile centrifugal blast unit is being used to blast the tank floor to a NACE No.1/SSPC SP 5. The Contractor has completed his final blast and has called for a hold point inspection. This is the 1 st time you have seen field based centrifugal blast cleaning. You observe what appears to be staining on the substrate however the Contractor assures you this is normal when using centrifugal blast units and what you are seeing is what is defined in the standard as an acceptable variation in appearance.
Your FIRST preferred course of action is to:
- A. Review the standard with the Contractor and re-inspect the floor
- B. Request that the Contractor re-blast the floor
- C. Call your supervisor
- D. Shut the job down
Answer: A
NEW QUESTION # 16
The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cure of
- A. powder coatings.
- B. epoxies.
- C. urethanes.
- D. inorganic zincs.
Answer: D
NEW QUESTION # 17
Pre-cleaning of work pieces will NOT remove
- A. snow, ice or water.
- B. oil or grease.
- C. dirt.
- D. mill scale.
Answer: D
NEW QUESTION # 18
Eddy current DFT gauges are used to measure Dry Film Thickness in which of the following situations:
- A. Non-Conductive coatings applied to a conductive metallic substrate
- B. Conductive coatings applied to a magnetic metallic substrate
- C. Conductive coatings applied to a cementitious substrate
- D. Magnetic coatings applied to a magnetic metallic substrate
Answer: A
NEW QUESTION # 19
The number of air turns in an enclosure can be affected by all of these EXCEPT
- A. type of dehumidification equipment (refrigerant or desiccant).
- B. manufacturer of the equipment.
- C. time of the year (winter/summer).
- D. coating type.
Answer: D
NEW QUESTION # 20
NACE No.13/ SSPC 6 identifies the use of:
- A. Watterjetting only
- B. Abrasive blasting only
- C. Steam cleaning only
- D. Various methods of cleaning
Answer: D
NEW QUESTION # 21
You are a NACE Level 2 in-house inspector working in a shop. Your in-house requires you to perform a sleeve test to test for soluble salts; however the 3 rd party NACE Level 3 inspector, the owner, has a san smart meter and has achieved a very different result and has rejected the pre-cleaning.
Your FIRST course of action is to:
- A. Review the specification with the other inspector to see what method was specified
- B. Advise your QC Manager to change the ITP to the use of the salt smart meter
- C. Advise the other inspector he is using an incorrect method
- D. Redo the pre-cleaning based on the other inspectors results
Answer: A
NEW QUESTION # 22
Which is used to calibrate a pH meter?
- A. Standard solvent solution
- B. Deionized water
- C. Distilled water
- D. Standard buffer solution
Answer: D
NEW QUESTION # 23
Examples of non-ferrous metals include
Select All that Apply:
- A. copper
- B. iron
- C. aluminum
- D. mild steel.
Answer: A,C
NEW QUESTION # 24
You are the NACE Level 2 Inspector on a project where overcoating of galvanized steel is being performed. The specification references SSPC SP 16 as the surface preparation method. At the pre-job meeting operations personnel make it clear that abrasive blasting will not permitted. The Owner's representative asks you what other methods might be used.
Of the options shown below, what would be the preferred option in this situation?
- A. SP 1 followed by caustic etching
- B. SP 1 followed by SP 2
- C. SP 1 followed by SP 3
- D. SP 1 followed by acid etching
Answer: B
NEW QUESTION # 25
When observing design defects the NACE Inspector should:
- A. Document the defect and the potential problems that could result
- B. Stop the job immediately
- C. Request that the item be rebuilt with a better design for coating
- D. Ignore the defect as the inspector can't change the design
Answer: A
NEW QUESTION # 26
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:
- A. The same as air blast cleaning
- B. Different than air blast cleaning
- C. Slightly different to air blast cleaning
- D. Comparable to air blast cleaning
Answer: A
NEW QUESTION # 27
In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?
- A. Gel stage
- B. Flow stage
- C. Cure stage
- D. Wetting stage
Answer: B
NEW QUESTION # 28
On pipelines, which coating is identifiable by its distinct colors, usually light blue, green, or grey?
- A. Liquid epoxies
- B. Heat-shrink sleeves
- C. Coal Tar Enamel
- D. Concrete
Answer: A
NEW QUESTION # 29
Centrifugal blast cleaning requires:
- A. Well maintained blast wheels
- B. Very large nozzles
- C. The use of single use abrasives
- D. A large volume of air to propel the abrasive
Answer: A
NEW QUESTION # 30
Corrosion is the reverse process of
- A. flaking.
- B. galvanic deterioration.
- C. hot dipping.
- D. steel manufacturing.
Answer: D
NEW QUESTION # 31
A single component water borne acrylic coating cures by:
- A. Oxidation
- B. Coalescence
- C. Solvent Evaporation
- D. Co-Reaction
Answer: B
NEW QUESTION # 32
When performing inspection in accordance with ASTM D 4138 the Inspector will use:
- A. A hardness tester
- B. A destructive paint inspection Tooke gauge
- C. A mechanical adhesion tester
- D. A set of 14 pencils of varying hardness
Answer: B
NEW QUESTION # 33
......
NACE NACE-CIP2-001 Real 2024 Braindumps Mock Exam Dumps: https://www.pass4sures.top/CIP-Level-2/NACE-CIP2-001-testking-braindumps.html
NACE-CIP2-001 Exam Questions | Real NACE-CIP2-001 Practice Dumps: https://drive.google.com/open?id=1b99sycvh68gfiHHt12Y2JOW2ZF7t6Rsb