Get Started 700-905 Exam [2022] Dumps Cisco PDF Questions [Q16-Q36]

Get Started: 700-905 Exam [2021] Dumps Cisco PDF Questions

700-905 Premium Exam Engine pdf Download

Cisco 700-905 Exam Syllabus Topics:

Topic	Details
Topic 1	HyperFlex products and services by attending training
Topic 2	Identifying staffing requirements, making kickoff meeting presentations Sales team interactions during all product deployment phases
Topic 3	SE handles pre-sales and post-sales engineering related customer plan Technical project management
Topic 5	SE maintains professional and technical knowledge
Topic 6	SE is responsible for defining and engineering related deliverables required to deploy the proposed customer solutions
Topic 7	Implement and operate functions Developments in the hyperconverged infrastructure market and Cisco HyperFlex solutions

NEW QUESTION 16
When building a HyperFlex cluster which two recommendations should be followed? (Choose two.)

A. Use the same server model for the cluster.
B. Use B-Series servers to improve converged node scale.
C. Use the same CPU model but memory configuration can be different.
D. Use HX 220s for compute nodes and HX 240s for converged nodes
E. Use the same server configuration for the cluster.

Answer: A,E

NEW QUESTION 17
When cabling a given HX node to the Fabric Interconnect which three actions are required? (Choose three.)

A. Connect server port L2 to Fabric Interconnect port L2
B. Connect the node to different port numbers on each of the two Fabric Interconnects.
C. Connect the node to the same port number on each of the two Fabric Interconnects.
D. Connect server port L1 to Fabric Interconnect port L1.
E. Connect port 1 on the VIC to Fabric Interconnect A.
F. Connect port 2 on the VIC to Interconnect B.

Answer: C,E,F

NEW QUESTION 18
Which two ways does Cisco HyperFlex upgrade the traditional RAID? (Choose two.)

A. Eliminating the need for additional hardware cards, while maintaining high performance.
B. Hardware replacement initiates self-healing with minimal impact
C. Limiting the number of drives locally, which are not a part of the shared datastore.
D. Distributing data locally, not just across the hosts in HyperFlex cluster
E. HyperFlex enables stretched RAID arrays spanning multiple geographic sites.

Answer: A,B

Explanation:

NEW QUESTION 19
Which three features for NVMe transfer protocol are valid? (Choose three.)

A. Streamlined commands for fewer CPU instructions
B. More and deeper queues
C. Increases memory speed for more lOPs
D. Requires 10 controller
E. Improves SAS and SATA speed
F. Uses PCIe interface

Answer: A,B,F

NEW QUESTION 20
What is required to cluster a pair of Fabric Interconnects?

A. HXDP 3.5.2 or better
B. uplink connections to the enterprise network
C. UCS Manager 2.1 or better
D. connection between the Fl pair using ports L1 and L2

Answer: D

Explanation:

NEW QUESTION 21
In all HX server types, where are capacity drives installed?

A. side
B. back
C. top
D. front

Answer: D

NEW QUESTION 22
HyperFlex compute nodes contribute what percentage of the overall disk storage capacity?

A. 0%
B. 20%
C. 5%
D. 10%

Answer: A

Explanation:

NEW QUESTION 23
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are three disadvantages of using validated yet mixed hardware? (Choose three.)

A. "Software only" solutions are inherently more secure, adhering to government regulations.
B. Validated yet "mixed" hardware systems may be supported by the specific original equipment manufacturers but software vendors require a master level services agreement.
C. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup and maintenance of an HCI solution might be simple you still need to configure and maintain the hardware part, which is not orchestrated by the HCI solution.
D. "Hardware only" solutions require less latency for data aggregation.
E. Validated hardware does not mean smooth performance, which particularly applies to hardware that is seldom chosen for the hardware part of the "software only" solution.
F. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that the consumer is using. The lack of control over the hardware can result in hardware not being security-compliant (usually the case with white box solutions) or not being optimally configured for the given HCI solution.

Answer: C,E,F

Explanation:

NEW QUESTION 24
Refer to the exhibit.

Which VIC model supports two wire connectivity to each Fabric Interconnect?

A. VIC 1457
B. VIC 1387
C. VIC 1227
D. VIC 1557

Answer: C

NEW QUESTION 25
How many PCIe standards-compliant interfaces do Cisco VICs support?

A. 0
B. 1
C. 2
D. 3

Answer: A

NEW QUESTION 26
Which two features enable RAID cards striping as well as mirroring and parity? (Choose two.)

A. Distributed drives across disparate systems can be in RAID together.
B. Hot replacement of drives available, depending on configuration
C. Integration with Cisco Intersight for a cloud-based storage management solution.
D. On RAID card failure, the RAID onboard concurrent cache assists rebuild cache.
E. No load on the system resources, drives seem as one drive to the operating system

Answer: B,E

Explanation:

NEW QUESTION 27
HyperFlex virtual servers differ from regular servers in which two key areas? (Choose two.)

A. CVM: Virtual appliance, which performs reading/writing, caching, deduplication, and compression.
B. SP: UCS Service Profiles are used to delineate MAC address pools from upstream networks.
C. CCC: Cisco Cloud Center is used for multi-cloud integration and seamless deployment.
D. No RAID is required to consolidate disks into a shared data platform.
E. NVMe: Regular servers do not support NVMe drives for high availability.

Answer: A,D

Explanation:

NEW QUESTION 28
In all HX server types, where are capacity drives installed?

A. side
B. back
C. top
D. front

Answer: D

Explanation:

NEW QUESTION 29
Refer to the exhibit. Which VIC model supports two wire connectivity to each Fabric Interconnect?

A. VIC 1387
B. VIC 1457
C. VIC 1227
D. VIC 1557

Answer: A

Explanation:

NEW QUESTION 30
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are
three disadvantages of using validated yet mixed hardware? (Choose three.)

A. "Software only" solutions are inherently more secure, adhering to government regulations.
B. Validated yet "mixed" hardware systems may be supported by the
specific original equipment manufacturers but software vendors require a master level services
agreement.
C. "Hardware only" solutions require less latency for data aggregation.
D. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that
the consumer is using. The lack of control over the hardware can result in hardware not being
security-compliant (usually the case with white box solutions) or not being optimally configured for the
given HCI solution.
E. Validated hardware does not mean smooth performance, which particularly applies to hardware that is
seldom chosen for the hardware part of the "software only" solution.
F. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup
and maintenance of an HCI solution might be simple you still need to configure and maintain the
hardware part, which is not orchestrated by the HCI solution.

Answer: B,C,E

NEW QUESTION 31
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to
automatically build the service profile in UCS Manager?

A. Check the administrative workflow option during the cluster creation process
B. Check the extended memory option during the cluster creation process
C. Check the GPU workflow during the cluster creation process
D. Check Run UCS Manager Configuration during the cluster creation process

Answer: C

NEW QUESTION 32
Which three configurations for read caching in Cisco HyperFlex are valid? (Choose three.)

A. Write-back (default): Only write information and most commonly used information are deposited in the cache
B. Level 4 cached (SSD): With semi-flash nodes; there is a large difference in read speeds between SSDs
C. No caching (SSD): With all-flash nodes; because there is little difference in read speeds between SSDs
D. Write-first (default for VDI): Infrequently used data is cached: freeing system resources for VDI performance
E. Write-through (install option for VDI): Only most commonly used data is cached: optimizing VDI performance
F. Battery-Initiated Read-back (default): Only read data and most commonly used data are deposited in the Level 4 read-back cache

Answer: A,C,E

Explanation: