Get Latest [Oct-2021] Conduct effective penetration tests using Pass4sures VMCE_V10
Penetration testers simulate VMCE_V10 exam PDF
NEW QUESTION 24
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?
- A. A standard virtual switch with uplink(s)
- B. A distributed virtual switch without uplink(s)
- C. A standard virtual switch without uplink(s)
- D. A distributed virtual switch with uplink(s)
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/surebackup_advanced_vlab.html?ver=
100
NEW QUESTION 25
Which of the following statements are true regarding backup copy jobs in Veeam Backup & Replication? (Choose two.)
- A. The backup copy job creates a forever forward incremental backup chain
- B. Retention settings maintain the desired number of restore points as well as offer optional GFS for archival purposes
- C. The backup copy job creates a single file with multiple restore points included within for archival purposes
- D. Backup copy jobs copy entire VBK, VIB, or VRB files from the source backup repository to the target backup repository
- E. During the backup copy job process, a VM snapshot is created for consistency
Answer: A,B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/about_backup_copy.html?ver=100
NEW QUESTION 26
A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?
- A. Configure a backup copy job in mirror mode, to a repository on the second site
- B. Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- C. Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site
- D. Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site
Answer: B
NEW QUESTION 27
You use datastores as the source for your backup jobs. Some VM backups are consuming too much repository disk space. They have backup files created by multiple backup jobs.
What could be the reason? (Choose two.)
- A. VM retention is set to do full backups more often than others in the job
- B. VMware Storage DRS (Distributed Resource Scheduler) moved VMs to different datastores
- C. Jobs are configured as per VM and these particular VM's need more fulls
- D. The VMs were moved to different datastores manually
- E. The VM is in a backup chain and trapped inside a single retention file
Answer: C,D
Explanation:
Explanation: Section: (none)
NEW QUESTION 28
A backup job has been configured to keep three incremental restore points and a synthetic full backup each Sunday. More restore points are present on disk than what was configured in the job. Why?
- A. The old restore points will be deleted after the new restore chain meets the retention policy
- B. The other restore points are weekly full backups, this is expected
- C. Per VM backup files are enabled in the repository
- D. You should configure the synthetic full backup to be performed on Mondays instead
Answer: B
Explanation:
Reference: https://www.veeam.com/kb1990
NEW QUESTION 29
A NAS backup job has been configured within Veeam Backup & Replication, and is completing successfully, but restore operations have been failing for the last few days.
What is causing the failure?
- A. The credentials added to the share are not allowed read-write access to the share, directories or files
- B. The cache repository assigned for this file share is unavailable for restore operations
- C. The server was added by using an IQN alias which is unable to be resolved
- D. The backup repository is sealed
Answer: A
NEW QUESTION 30
In the event a VMware VM configuration file (VMX) is missing and a restore is needed, what Veeam restore process is the best choice for this situation?
- A. Instant VM recovery
- B. VM file restore
- C. Virtual disk restore
- D. Instant disk recovery
Answer: B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/vmfile_recovery.html?ver=100
NEW QUESTION 31
Which of the following scenarios properly applies the 3-2-1 rule to backup jobs?
- A. Use a backup job to back up to a Scale-out Backup Repository configured with capacity tier using AWS S3 and enable move mode
- B. Use backup jobs to back up directly to tape; ship the tapes off site
- C. Use a backup job to back up to a local repository; perform a backup copy job to a repository in another location
- D. Use a backup job to back up to a local repository; perform a backup copy job to the same repository
Answer: D
NEW QUESTION 32
To suppress Veeam ONE alarms under specific conditions or when a specific event occurs, which of these options can be selected? (Choose three.)
- A. Veeam backup activity
- B. Storage snapshot deletion
- C. Snapshot creation
- D. Storage snapshot creation
- E. Snapshot deletion
- F. High CPU usage
Answer: A,C,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/one/alarms/alarm_suppression.html?ver=100
NEW QUESTION 33
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m.
and the administrator fails over the
replica at 8 a.m. When the power comes back on, the administrator performs the "failback" action at 2 p.m. and checks the state of the original VM. They recognize that not all data is available. What is missing?
- A. Data from 1 a.m. to 7 a.m.
- B. Data from 8 a.m. to 2 p.m.
- C. Data from 1 a.m. to 2 p.m.
- D. Data from 7 a.m. to 8 a.m.
Answer: C
NEW QUESTION 34
Figure A shows the backup files on a Scale-out Backup Repository (SOBR) created by a single Veeam backup job. The SOBR is configured to offload to capacity tier in move mode. If the offload was completed successfully, what will remain on the performance extents for the files uploaded to the capacity tier?
- A. VIB and VBK files (data blocks only)
- B. VBK files (metadata and data)
- C. VBM files (metadata only)
- D. VIB and VBK files (metadata only)
- E. VIB files (metadata and data)
Answer: D
NEW QUESTION 35
A company needs to maintain and verify backups at a secondary site to meet the following requirements: RTO of two hours, RPO of 12 hours, four weeks retention. Which of the following backup copy job configurations meets these requirements?
- A. Periodic backup copy job, scheduled for a two-hour interval, with 112 restore points to retain
- B. Periodic backup copy job, scheduled for a 12-hour interval, with 112 restore points to retain
- C. Periodic backup copy job, scheduled for a 12-hour interval, with 56 restore points to retain
- D. Periodic backup copy job, scheduled for a two-hour interval, with 56 restore points to retain
Answer: A
Explanation:
Explanation: Section: (none)
NEW QUESTION 36
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?
- A. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
- B. In the virtual machines setting of the job, add a script in the scripts tab under "Run the following script before the job:"
- C. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
- D. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM
Answer: D
NEW QUESTION 37
You fail back a VM replica to the original location. Which of the following requirements needs to be met to be able perform quick rollback during a failback of a replica?
- A. Perform failback to VM within the same subnet
- B. The VM replica must have access to the repository where the full backup of the VM resides
- C. The VM replica must be created with the "Use Changed Block Tracking data" option enabled
- D. Indexing must be enabled for the original VM
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/failback_quick_rollback.html?ver=100
NEW QUESTION 38
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?
- A. Re-add all Veeam components involved in data transfer through the required interfaces
- B. Use the preferred network settings to switch to data network for the backup traffic
- C. Create a global network traffic rule, set appropriate source and target IP range
- D. Update routing tables on the components involved in data transfer
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/select_backup_network.html?ver=100
NEW QUESTION 39
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
- B. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- C. If a VM within the replication job is not mapped, the job will fail
- D. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
Answer: D
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/replica_seeding_hv.html?ver=100
NEW QUESTION 40
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?
- A. Use a failover plan
- B. Use on-click failover
- C. Use a planned failover
- D. Use Instant VM Recovery
Answer: D
Explanation:
Reference: https://www.veeam.com/virtual-machine-backup-solution-free.html
NEW QUESTION 41
......
Tested Material Used To VMCE_V10 Test Engine: https://www.pass4sures.top/VMCE/VMCE_V10-testking-braindumps.html