Get instant access to 300-510 Practice Tests 2021 Free Updated Today!
Welcome to download the newest PassLeader 300-510 PDF dumps ( 104 Q&As)
Prerequisites for Final Exam
The individuals concerned will already have awareness and skills involving how to execute and operate Cisco core technologies for the networks that are targeted at the Service Providers. They should also have a deep comprehension of the 300-510 subject matter so gaining the requisite knowledge takes deliberate learning that makes use of recommended courses as well as revision or study guides. Potential candidates should also be aware of the registration process for the official test. Thus, they should have a Pearson VUE account before they can do the final registration, which includes selecting the number of the evaluation they intend to do.
Audience, Prerequisites, and Objectives for Implementing Cisco Service Provider Advanced Routing Solutions Training
Particularly, this course for exam 300-510 invigorates the needs of network administrators, project managers, system engineers, and network designers. The initial requirements they need to meet before undertaking the training are such as having at least intermediate knowledge covering Cisco IOS or Cisco IOS XE as well as Cisco IOS XR Software that touches on the configuration. More requirements include awareness of networking concerning IPv6 and IPv4 TCP/IP, intermediate knowledge about routing protocols of OSPF, BGP, and ISIS, and comprehension regarding MPLS technologies, multicast technologies, and segment routing. Also, there are other vital courses that one ought to have passed through before this specific training. This is to gain the proper perspective about what they are about to learn and ensure this goes on effectively. Overall, on completing this 300-510 exam course, you will have mastered the following objectives:
- Putting into operation and authenticating the protocol known as PIM-SM;
- Capabilities in configuring BGP so that it can connect upstream SP or customers successfully to the SP network;
- Troubleshooting ISIS, OSPF, and BGP;
- Using IPv6 mechanisms for tunneling;
- Abilities in configuring route redistribution;
- Executing MSDP within the interdomain surrounding;
- Capabilities in executing advanced features concerning multilevel ISIS that run in SP networks;
- Implementing advanced features so that there is enhanced convergence within BGP networks;
- Executing security options for BGP;
- Deploying and verifying MPLS;
- Executing and authenticating technology for segment routing within an interior gateway protocol;
- Putting into practice mechanisms targeting dynamic RP (Rendezvous Point) distribution.
- Implementing enhanced PIM-SM associated features;
- Describing the usage of traffic engineering within networks for segment routing;
- Implementing and troubleshooting traffic engineering for MPLS;
- Comprehension of protocols for routing that are usually utilized in SP environments;
- Configuring BGP scalability within SP networks;
- Potentiality in executing advanced features in relation with OSPFv2 that run in SP networks;
- Describing and comparing core concepts for multicast;
The skills covered when practicing with the hands-on labs for exam 300-510 include executing Special Area Types for OSPF, implementing Multiarea IS-IS, route redistribution, route selection for BGP, route reflectors, security options for BGP, and troubleshooting routing protocols. Others are executing MPLS within the SP core, deploying MPLS TE for Cisco, configuring and authenticating segment routing for IGP, and operating with tunnels aimed at IPv6. Candidates will also draw practical skills in the areas of enabling and optimizing PIM-SM, executing enhancements for PIM-SM, and putting into practice RP distribution.
NEW QUESTION 19
Refer to the exhibit.
After troubleshooting BGP traffic steering issue, which action did the network operator take to achieve the correct effect of this configuration?
- A. Routes that have passed through AS 65517 have the local preference set to 150 and the traffic is denied.
- B. Routes that have passed through AS 65517 have the local preference set to 150.
- C. Routes that have originated through AS 65517 have the local preference set to 150.
- D. Routes directly attached to AS 65517 have the local preference set to 150.
Answer: B
NEW QUESTION 20
Which expression, when used with the as-path-set command, matches the AS path attribute of the route?
- A. dfa-regtex
- B. neighbor-is
- C. ios-regex
- D. Length
Answer: C
NEW QUESTION 21
Which statement about BFD on Cisco IOS XR Software is true?
- A. Cisco IOS XR Software does not support BFD multihop for IPv4.
- B. BFD is not compatible between Cisco IOS XR and Cisco IOS Software.
- C. Cisco IOS XR router must use LDP to route back to the Cisco IOS router to establish the peer relationship.
- D. Cisco IOS XR router must use dynamic routing or a static route back to the Cisco IOS router to establish the peer relationship.
Answer: D
Explanation:
Reference:
guide/b-routing-cg-asr9000-63x/b-routing-cg-asr9000-63x_chapter_0100.html
NEW QUESTION 22
Refer to the exhibit.
A network engineer applied configuration on R5 to summarize all OSPF routes, but R4 is still receiving specific routes from R5. The engineer has confirmed that both R5 and R4 routers are configured with correct summarization configuration but R5 Is not sending the summary routes What action must the engineer take to fix the problem?
- A. Configure a sham link between R4 and R5 to support summarization within Area 2
- B. Clear link-state database on both R4 and R5 routers for summarization to work
- C. Remove summarization configuration on R5 and configure it on R4
- D. Move R4 and R5 in separate areas as now they maintain the same link-state database
Answer: D
NEW QUESTION 23
Refer to the exhibit.
A service provider technician is working on a multicast issue for a customer. While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry.
Which factor might explain this issue?
- A. Only ASM is permitted
- B. Only GLOP is permitted
- C. Only the administratively scoped range is permitted
- D. Only the default SSM range is permitted
Answer: D
NEW QUESTION 24
Which two conditions must be met before separate ISPs can provide interdomain multicast routing? (Choose two.)
- A. Each ISP must configure its network to use PIM-DM.
- B. Each ISP must support intradomain multicast routing.
- C. Each ISP must dedicate a single router to handle multicast traffic between providers.
- D. Each ISP must replace its RP assignment with a global RP.
- E. Each ISP must configure MSDP to connect its individual multicast administrative domain to the domains at other ISPs.
Answer: B,E
NEW QUESTION 25
Refer to the exhibit.
Which two commands must the engineer configure for the company's PIM-PIM network to enable Auto-RP mappings to be sent over the FastEthernet0/0 interface without affecting normal operation? (Choose two)
- A. enable sparse-mode
- B. enable Auto-RP announcements
- C. enable sparse-dense mode
- D. enable auto-rp listener
- E. enable dense mode
Answer: C,D
NEW QUESTION 26
Refer to the exhibit.
CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1. Which configuration achieves this goal?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
NEW QUESTION 27
Refer to me exhibit.
A network engineer sets up a multihoming eBGP topology where multiple Autonomous Systems connect to ASN 64501. The engineer wants to block all the routers coming from ASN 64502. but allow all the others. For that purpose, the following AS Pam prefix 1st s being used:
What must be fixed to achieve this result?
- A. The AS-PATH filter must be defined inside the route-map mode
- B. The statement must CM modified with ip as path access list 1 deny A64502$
- C. At the end ip as-path access-list 10 permit .* must be included
- D. The statement must be modified with ip as-path access-list 1 deny _64502_
Answer: C
NEW QUESTION 28
Refer to the exhibit.
What is the relationship between Router 1 and Router 2?
- A. Router 1 centrally learns the topology of the network to aid in SR-TE path selection, and Router 2 is a node that feeds Router 1 topology information.
- B. Router 1 and Router 2 centrally learn the topology of the network to aid in SR-TE path selection for peers.
- C. Router 2 is the head-end router in an SR-TE tunnel, and it is learning topology of the network from the PCE enabled on Router 1.
- D. Router 1 and Router 2 are participating in SR-TE tunnels and are both head-end routers.
Answer: C
NEW QUESTION 29
Which two routing protocols have extensions capable of running SRv6? (Choose two.)
- A. RIP
- B. BGP
- C. OSPF
- D. EIGRP
- E. IGRP
Answer: B,C
NEW QUESTION 30
Refer to the exhibit.
Which task must you perform on interface g1/0/0 to complete the SSM implementation?
- A. disable IGMP
- B. configure IGMPv3
- C. configure OSPFv3
- D. enable CDP
Answer: B
NEW QUESTION 31
Refer to the exhibit.
A network operator is getting the route for 10.11.11 0/24 from two upstream providers on
#XR3. The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of 10.0.0.9 as primary when available. Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?
- A. lower local preference on the prefix coming from 192.168.0.2
- B. weight of 100 on the prefix coming from 192.168.0.1
- C. weight of 0 on the prefix coming from 192.168.0.2
- D. higher local preference on the prefix coming from 192.168.0.1
Answer: D
NEW QUESTION 32
Refer to the exhibit.
An engineer is troubleshooting an OSPF issue. Router 1 has a neighbor relationship with router 2. Only router 1 classful EIGRP routes can be seen on router 2. In order for all EIGRP routes to be redistributed correctly, which action should be taken?
- A. Router 1 must have the keyword 1 included in the redistribution command for all EIGRP routes to be redistributed.
- B. Router 1 must remove the AS number 1 from the redistribution command for all EIGRP routes to be redistributed.
- C. Router 1 must have the keyword included in the redistribution command for all EIGRP routes to be redistributed.
- D. Router 1 must have the keyword subnets included in the redistribution command for all EIGRP routes to be redistributed.
Answer: D
NEW QUESTION 33 
Refer to the exhibit. A network operator is getting the route for 10.11.11 0/24 from two upstream providers on
#XR3. The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of
10.0.0.9 as primary when available. Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?
- A. lower local preference on the prefix coming from 192.168.0.2
- B. weight of 100 on the prefix coming from 192.168.0.1
- C. weight of 0 on the prefix coming from 192.168.0.2
- D. higher local preference on the prefix coming from 192.168.0.1
Answer: D
NEW QUESTION 34
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- B. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
- C. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- D. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
Answer: B
NEW QUESTION 35
Which feature is used in multicast routing to prevent loops?
- A. RPF
- B. STP
- C. split horizon
- D. inverse ARP
Answer: A
NEW QUESTION 36
Refer to the exhibit.
A customer reports that Host-1 is failing to receive streaming traffic from the IPTV source. The engineer has confirmed that hosts on router R2 are receiving traffic normally and that Host-1 is correctly sending subscription messages to join the IPTV stream. Which action must the engineer take to correct the problem?
- A. Configure IGMP version 3 under interface GigabitEthernet 1/(V1 on R3
- B. Remove IP PIM SSM and IGMP from interface GigaEthernet 1/0/1 on R3 and configure under global configuration
- C. Configure IP PIM SSM and IGMP version 2 under interface GigatxtEthernet 1/0/1 on R3
- D. Remove IP PIM SSM from the global configuration on R3 and configure it under the GigabitEthernet 1/0/1 interface
Answer: A
NEW QUESTION 37
......
For more info read reference:
Oct-2021 Latest Pass4sures 300-510 Exam Dumps with PDF and Exam Engine: https://www.pass4sures.top/CCNP-Service-Provider/300-510-testking-braindumps.html
Premium Quality Cisco 300-510 Online dumps: https://drive.google.com/open?id=1JtHChPFabYbTiEPvnLXkpWRptwHHVswG