First Attempt Guaranteed Success in D-VXR-DS-00 Exam 2025
Real D-VXR-DS-00 Exam Questions are the Best Preparation Material
NEW QUESTION # 17
What are two rules for witness on a VxRail stretched cluster? (Choose two.)
- A. It must be deployed in advance.
- B. It must be the same vSphere version as the VxRail nodes.
- C. Only a virtual appliance is supported.
- D. It can be managed by a separate vCenter than the one managing the VxRail cluster.
- E. The Witness appliance is the same for vSAN ESA and vSAN OSA architecture.
Answer: D,E
Explanation:
The witness appliance is the same for both vSAN ESA and OSA architectures, providing consistency across deployments.
The witness can be managed by a separate vCenter server than the one managing the VxRail cluster, allowing flexible management options.
NEW QUESTION # 18
What is the minimum number of nodes required to create a standard VxRail cluster?
Response:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 19
An architect for a new VxRail cluster plans to use predefined network profile for vSphere Distributed Switch.
Which three configurations are available in predefined profile? (Choose three.)
- A. 4x1 GbE (Integrated NIC)
- B. 2x10 GbE (Integrated NIC)
- C. 4x25 GbE (Integrated NICs)
- D. 2x25 GbE (PCIe NICs)
- E. 4x10 GbE (Integrated NIC)
Answer: B,D
Explanation:
Predefined network profiles for vSphere Distributed Switch in VxRail typically include configurations such as
2x10 GbE integrated NICs, 2x25 GbE PCIe NICs, and 4x25 GbE integrated NICs to accommodate various performance and connectivity requirements.
NEW QUESTION # 20
When using an existing customer-managed vCenter what setting need to be preconfigured before deployment?
- A. Storage Folder
- B. VM Folder
- C. Cluster Object
- D. Datacenter Object
Answer: C
Explanation:
When deploying VxRail with an existing customer-managed vCenter, the Cluster Object must be preconfigured to provide a container for the new VxRail nodes and resources during deployment.
NEW QUESTION # 21
Which tool can be used to gather application and virtual environment workload of an existing environment?
- A. VxRail Configuration Portal
- B. Live Optics
- C. Secure Connect Gateway
- D. VxRail Sizer
Answer: B
Explanation:
Live Optics is the tool designed to gather detailed application and virtual environment workload data from existing environments to aid in sizing and planning VxRail deployments.
NEW QUESTION # 22
What is a key consideration when selecting nodes for a high-availability VxRail cluster?
Response:
- A. High-density storage drives
- B. Hybrid SSD and HDD configurations
- C. Redundant network interfaces
- D. Balanced compute and memory resources
Answer: D
NEW QUESTION # 23
In which scenario would an architect specify VxRail Dynamic Nodes?
- A. A customer needs to refresh their server environment after having recently acquired a new PowerScale H7000 storage array.
- B. A customer is designing a solution for retail locations that requires a minimal amount of hardware on- site.
- C. A customer needs to refresh their server environment after having recently acquired a new PowerStore
5200T storage array. - D. A customer is deploying a new data center and wants a solution that integrates storage and compute management.
Answer: C
Explanation:
VxRail Dynamic Nodes are specified when a customer wants to refresh their server environment but already has a PowerStore 5200T storage array, allowing integration of external storage with VxRail compute nodes.
NEW QUESTION # 24
What is the recommended network configuration for a VxRail Dynamic Node cluster?
Response:
- A. Dedicated storage VLANs
- B. Fibre Channel connectivity for storage
- C. Dual-switch network topology
- D. High-speed Ethernet with multiple uplinks
Answer: D
NEW QUESTION # 25
What are the minimum network bandwidths required for vSAN?
- A. 10 GbE for OSA, 25 GbE for ESA
- B. 10 GbE for OSA, 10 GbE for ESA
- C. 1 GbE for OSE, 10 GbE for ESA
Answer: A
Explanation:
For VxRail, vSAN requires a minimum of 10 GbE bandwidth for Older Software Architectures (OSA) and 25 GbE for Enhanced Software Architectures (ESA) to meet performance and reliability standards.
NEW QUESTION # 26
The VxRail Cluster Configuration Report includes which three parameters that are required to perform the deployment? (Choose three.)
- A. vCenter Server hostname
- B. DNS server IP address
- C. Administrative passwords
- D. PTP server IP address
- E. VxRail node hostnames
Answer: A,B,E
Explanation:
The VxRail Cluster Configuration Report includes essential deployment parameters such as vCenter Server hostname, DNS server IP address, and VxRail node hostnames to ensure proper network and management configuration during deployment.
NEW QUESTION # 27
What are key steps to ensure optimal vSAN deployment during VxRail setup?
(Choose two)
Response:
- A. Configure Fibre Channel for node discovery
- B. Use SSDs for cache
- C. Use manual IP allocation for vSAN nodes
- D. Enable deduplication and compression
Answer: B,D
NEW QUESTION # 28
What is the primary purpose of the VxRail Manager in the configuration process?
Response:
- A. Automate node discovery and cluster configuration
- B. Manage VMware licensing
- C. Create and manage VLANs
- D. Monitor CPU and memory usage in real-time
Answer: A
NEW QUESTION # 29
What are three supported VxRail Stretched Cluster configuration? (Choose three.)
- A. L2 and L3 site-to-site connectivity
- B. Four nodes and a witness
- C. All flash on Site A and hybrid on Site B
- D. Two nodes and a witness
- E. vSAN ESA on Site A and vSAN OSA on Site B
Answer: A,B,D
Explanation:
Both Layer 2 (L2) and Layer 3 (L3) site-to-site connectivity are supported for VxRail stretched clusters.
Configurations with two nodes plus a witness and four nodes plus a witness are supported cluster sizes for stretched clusters, providing fault tolerance across sites.
NEW QUESTION # 30
Which component is essential for physical connectivity in a VxRail cluster?
Response:
- A. Fibre Channel fabric
- B. vSAN datastore
- C. RAID controller
- D. Management switch
Answer: D
NEW QUESTION # 31
Which VxRail Dynamic Node configuration supports a VxRail-managed vCenter on the local cluster?
- A. Unity XT 680 connected via NFS
- B. PowerMax 2000 connected via FC-NVMe
- C. PowerStore 5200T connected via NVMe/TCP
- D. PowerFlex R750 connected via SDC
Answer: C
Explanation:
The PowerStore 5200T connected via NVMe/TCP supports integration with a VxRail-managed vCenter on the local cluster, enabling optimized storage performance and management within the VxRail ecosystem.
NEW QUESTION # 32
What is the primary purpose of reviewing the completed configuration in VxRail Manager?
Response:
- A. Configuring fault tolerance domains
- B. Optimizing workload performance
- C. Ensuring accuracy before deployment
- D. Enabling real-time performance monitoring
Answer: C
NEW QUESTION # 33
......
Practice LATEST D-VXR-DS-00 Exam Updated 124 Questions: https://www.pass4sures.top/Converged-Infrastructure/D-VXR-DS-00-testking-braindumps.html
Download Latest D-VXR-DS-00 Dumps with Authentic Real Exam QA's: https://drive.google.com/open?id=1pdUdoARCQBHJxffhYV6WaiandL6QaqAm