Download Free Network Appliance NS0-528 Real Exam Questions Download
Latest Network Appliance NS0-528 Real Exam Dumps PDF
NEW QUESTION # 82
How can you ensure data integrity in a data protection solution?
- A. By using data redundancy
- B. By using data deduplication
- C. By using data compression
- D. By implementing data validation checks
Answer: D
NEW QUESTION # 83
You notice that after you delete data from your FlexVol volume, some Snapshot copies have also been deleted. Snapshot auto delete is enabled.
Which volume autosize mode must be enabled for this behavior to occur?
- A. disrupt
- B. off
- C. grow
- D. grow_shrinik
Answer: A
NEW QUESTION # 84
A client is planning to configure a SnapMirror relationship between two sites. Normally their ISP provides network throughput of 100 Mbps; however, they can arrange to have this burst to 1 Gbps for a period of time at an additional cost.
Their intention is to back up 400 GB of Snapshot data each day using the burst option to keep the replication time to a minimum.
In this scenario, how much burst time do they need to purchase?
- A. 60 minutes
- B. 45 minutes
- C. 30 minutes
- D. 15 minutes
Answer: B
NEW QUESTION # 85
You need to protect an entire SVM and all of its data volumes and have decided to use SnapMirror SVM. The DR cluster uses a different subnet from the production cluster, and the destination SVM has the added requirement of also being online and serving data as read-only.
What option would you set to achieve both goals?
- A. Use the -identity-preserve option set to false in the snapmirror create command.
- B. Use the -identity-preserve option set to true in the snapmirror create command.
- C. Set the -discard-configs option to network in the applied snapmirror policy.
- D. Set the -type option to automated-failover in the applied snapmirror policy.
Answer: A
Explanation:
Setting -identity-preserve false allows the destination SVM to have a different network configuration, which is required since the DR site uses a different subnet. It also enables the destination SVM to be online and serve data in read-only mode, which meets the requirement for data availability during normal operation without promoting the SVM.
NEW QUESTION # 86
Which NetApp technology would you use to physically separate non-routable SnapMirror network traffic?
- A. IPspaces
- B. cluster peer encryption
- C. lfgrps
- D. broadcast domains
Answer: A
NEW QUESTION # 87
What are three prerequisites for replicating an Element OS volume to ONTAP? (Choose three.)
- A. The ONTAP cluster must be running ONTAP 9.3 or later.
- B. SnapVault must be licensed on the ONTAP cluster.
- C. Enable SnapMirror on the SolidFire cluster.
- D. SnapMirror must be licensed on the SolidFire cluster.
- E. SnapMirror must be licensed on the ONTAP cluster.
Answer: C,D,E
NEW QUESTION # 88
A company just installed SnapCenter to help manage their ONTAP 9.7 environment. The database administrator wants to add new volumes with LUNs for a 10 TB Oracle database.
Which two tools would accomplish this task? (Choose two.)
- A. OnCommand Insight
- B. ONTAP System Manager
- C. SnapCenter Plug-in for Oracle Database
- D. Active IQ Unified Manager
Answer: B,C
NEW QUESTION # 89
What is the minimal interface requirement for a SnapMirror relationship between clusters?
- A. one cable directly connected to both clusters
- B. one data LIF per SVM
- C. one intercluster LIF per node
- D. one intercluster LIF per SVM
Answer: C
Explanation:
For a SnapMirror relationship to function properly, each node in a cluster must have at least one intercluster LIF. These LIFs are used exclusively for replication traffic and ensure that all nodes can participate in SnapMirror operations.
NEW QUESTION # 90
A storage system is running low on space, and you enable a Snapshot autodelete policy on a volume. You need to replicate Snapshot copies to another storage system before they are deleted.
Which two SnapMirror policies would retain the deleted Snapshot copies? (Choose two.)
- A. MirrorAndVault
- B. XDPDefault
- C. MirrorAllSnapshots
- D. MirrorLatest
Answer: A,C
NEW QUESTION # 91
You are the administrator of your company's ONTAP clusters. You are asked to provide a disaster recovery solution between your primary AFF A400 cluster and your FAS2720 cluster with the highest possible availability at the lowest possible price.
In this scenario, which product will satisfy this requirement?
- A. SM-S
- B. SnapMirror
- C. MetroCluster
- D. SVM-DR
Answer: C
NEW QUESTION # 92
You want to create authenticated peer relationships between clusters and SVMs to provide data replication service between volumes in different clusters.
In this scenario, which two tools accomplish this task? (Choose two.)
- A. OnCommand Insight
- B. OnCommand System Manager
- C. CLI
- D. SnapCenter
Answer: B,C
NEW QUESTION # 93
An administrator wants to automatically prevent volumes that are used in a SnapMirror relationship from running out of space.
Which of the following volume snapshot autodelete modify parameters would ensure that this goal can be accomplished?
- A. -commitment disrupt
- B. -commitment try
- C. -defer-delete user_created
- D. -defer-delete scheduled
Answer: B
Explanation:
Setting -commitment try on the volume snapshot autodelete modify command allows ONTAP to automatically delete eligible Snapshot copies when a volume is running low on space, but only if it can do so without violating SnapMirror or retention policies. This ensures volumes in SnapMirror relationships stay healthy and do not run out of space unexpectedly.
NEW QUESTION # 94
You are tasked with planning a backup solution for a VMware environment running Windows VM. There is a requirement that production datastores must have ten days of local backups and a daily replication to a DR cluster site. The development datastores require only 7 days of local backups. There is also a requirement for a tool for the VMware administrators that enables them to monitor backups and perform restores.
What procedure can you use to meet the requirements?
- A. In NetApp ONTAP System Manager, create Snapshot policies for production and development datastore volumes, and create a protection relationship for each production volume.
- B. Install the NetApp SnapCenter Server from the GUI, create policies for production and development, and create resource groups for the production and development datastores.
- C. Deploy the NetApp SnapCenter Plug-In for Microsoft Windows from vCenter, create policies for production and development, and create resource groups for the production and development datastores.
- D. Deploy the NetApp SnapCenter Plug-In for VMware vSphere from vCenter, create policies for production and development, and create resource groups for the production and development datastores.
Answer: D
Explanation:
To meet the requirements of:
* Local backups for production (10 days) and development (7 days),
* Daily replication to a DR site for production, and
* Providing VMware administrators with backup and restore control,
you should use the SnapCenter Plug-In for VMware vSphere, which integrates directly with vCenter. It supports backup, restore, and monitoring of VMs and datastores, and allows policy and resource group configuration aligned with the specified retention and replication needs.
NEW QUESTION # 95
A customer that is running 100% SAN workloads wants to begin tiering cold data from their AFF ONTAP-based systems using a FabricPool.
Using NetApp best practices, what should be configured to accomplish this task?
- A. Amazon S3 Glacier
- B. NetApp StorageGRID
- C. Azure cool Blob storage
- D. NetApp Element
Answer: B,C
NEW QUESTION # 96
Exhibit:
Commvault IntelliSnap and NetApp SnapCenter are both being used to back up the same Microsoft SQL Server database.
Referring to the exhibit, which action will SnapCenter perform on the Microsoft SQL transaction logs?
- A. truncate
- B. move
- C. delete
- D. keep
Answer: A
NEW QUESTION # 97
Your customer wants to implement a solution to protect only a select number of NFSv3 volumes in a particular aggregate that stores their mission-critical application data. The customer wants the volume's data replicated to secondary storage and have application write operations fail if they cannot be replicated.
The customer needs to maintain a zero RPO and a very low RTO. In this scenario, which solution satisfies these requirements?
- A. SnapMirror Synchronous using Sync mode
- B. Mirrored aggregates using SyncMirror
- C. SnapMirror Synchronous using StrictSync mode
- D. Mirrored SVMs using MetroCluster
Answer: B
NEW QUESTION # 98
What is a SnapMirror in NetApp ONTAP?
- A. A method for encrypting data to protect it from unauthorized access
- B. A method for archiving data for long-term storage
- C. A method for compressing data to reduce storage space
- D. A method for replicating data between NetApp ONTAP systems
Answer: D
NEW QUESTION # 99
......
PDF (New 2025) Actual Network Appliance NS0-528 Exam Questions: https://www.pass4sures.top/NCIE-Data-Protection/NS0-528-testking-braindumps.html
NS0-528 Exam Dumps, NS0-528 Practice Test Questions: https://drive.google.com/open?id=1_P0sGq6Mv78FG_XMOgGwsgFfteXl3P8s