Cisco 350-501 Exam Dumps - PDF Questions and Testing Engine
Latest 350-501 Exam Dumps for Pass Guaranteed
Preparing for the Cisco 350-501 exam requires a solid understanding of service provider network technologies. Candidates should have experience working with routing protocols, MPLS, QoS, and VPN technologies in a service provider environment. They should also be familiar with the Cisco IOS XR operating system, which is used to configure and manage service provider networks. Additionally, candidates should be comfortable with configuring and troubleshooting complex network topologies.
The Cisco 350-501 exam covers a wide range of topics that include network architecture, routing protocols, MPLS, QoS, network automation, and security. It is a comprehensive test that requires an in-depth understanding of the concepts and technologies involved in service provider networks. 350-501 exam also evaluates the candidate's ability to work with Cisco equipment and solutions, including routers, switches, and other network devices.
NEW QUESTION # 338
Which OoS model allows hosts to report their OoS needs to the network?
- A. DiffServ
- B. CB-WFQ
- C. MQC
- D. IntServ
Answer: B
NEW QUESTION # 339
Refer to the exhibit. What does this value mean when it is received in XML?
- A. It indicates a break in a sequence
- B. It means a data field is blank
- C. It shows the ending of the script
- D. It indicates a value assigned by a network administrator to tag a route
Answer: B
Explanation:
When no data exist, you can represent a level of XML hierarchy in one of two ways:
using opening and closing tags: <tag></tag>
using shorthand notation: <tag/>
NEW QUESTION # 340
A network architect must implement CSC VPN services for a new backbone carrier. Which two benefits does the architecture provide? (Choose two.)
- A. It leverages IPsec to establish connections within the backbone. which eliminates the need for BGP to distribute routes.
- B. It relies on IP communications, which simplifies the network design.
- C. It maintains.a single backbone, which simplifies the VPN implementation to customers.
- D. It eliminates the need to maintain a centralized network-maintenance and operations strategy.
- E. It supports a scalable growth strategy that services multiple customers efficiently
Answer: C,E
NEW QUESTION # 341
Refer to the exhibit:
Which three outcomes occur if the prefix list is added to the neighbor? (Choose three)
- A. 192.168 0.0/19 is permitted
- B. 192.168 0.0/17 is denied.
- C. 192.168 0.0/17 is permitted
- D. 192.168.0.0/16 is denied
- E. 192.168 0.0/19 is denied.
- F. 192.168 0.0/16 is permitted
Answer: A,C,D
NEW QUESTION # 342
Refer to the exihibit.
Refer to the exhibit. What is the purpose of this JSON script?
- A. It confirms a user's login credentials.
- B. It changes the existing password.
- C. It deletes a user's authentication record.
- D. It updates a user authentication record.
Answer: B
NEW QUESTION # 343
An engineer is trying to implement BGP in a multihomed architecture. What must the engineer configure to influence inbound path selection?
- A. A route map with WEIGHT attribute to control the inbound traffic
- B. An offset list to set the metric for routes received from neighboring autonomous systems
- C. A route map with AS-PATH attribute to control the inbound traffic
- D. An access list to identify traffic and enable it on both of the provider-facing interfaces
Answer: C
Explanation:
Section: Networking
NEW QUESTION # 344
Refer to the exhibit:
Which statement about the status of the neighbor relationship between R1 and R2 is true?
- A. The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area
- B. The neighbor relationship is down because the two routers are configured with different area types
- C. The neighbor relationship is down because the two routers are in the same subnet.
- D. The neighbor relationship is up because R2 is level 1 and level 2 router.
Answer: A
Explanation:
The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different areas. In the IS-IS (Intermediate System to Intermediate System) protocol, Level 1 routers exchange routing information with other Level 1 routers in the same area, while Level 2 routers exchange information between areas. Since R1 is configured as a level-2 router and R2 as a level-1 router, they cannot form a neighbor relationship if they are not in the same area. References: Implementing and Operating Cisco Service Provider Network Core Technologies source documents or study guide
NEW QUESTION # 345
Refer to the exhibit:
An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?
- A. All traffic to 192.168.1.0/24 is dropped
- B. All traffic is dropped
- C. Router 1 and Router 2 advertise the route to 192.0.2.0/24 to all BGFD peers.
- D. Router 1 drops all traffic with a local-preference set to 150
Answer: D
Explanation:
The configuration shown indicates that Router 1 is set up with a route-map named "ddos" that matches traffic tagged with "tag 1". The traffic matching this tag is then set to have a next-hop IP of 192.0.2.1 and a local preference of 150. The community is also set to "no export", which means this route will not be advertised to external BGP peers. Since there's no explicit deny statement in the configuration, only traffic with tag 1 and local preference of 150 will be dropped by Router 1 as per the BGP routing policy. Reference: Implementing and Operating Cisco Service Provider Network Core Technologies course materials.
NEW QUESTION # 346
Refer to the exhibit.
A network operator working for a telecommunication company with an employee 3994:37:650 is implementing a cisco Unified MPLS solution. What is the effect of this implementation?
- A. EIGRP is deployed between the PEs and ABRs with RFC 3107.
- B. BGP is deployed between the PEs and ABRs with RFC 3107.
- C. IS-IS is deployed between the PEs and ABRs with RFC 3107.
- D. OSPF is deployed between the PEs and ABRs with RFC 3107.
Answer: B
Explanation:
NEW QUESTION # 347
Refer to the exhibit:
Which condition must be met by the OSPF peer of router R1 before the two devices can establish communication?
- A. The interface on the OSPF peer must use the same key ID and key value as the configured interface
- B. The interface on the OSPF peer may have a different key ID, but it must use the same key value as the configured interface
- C. The OSPF peer must use clear-text authentication
- D. The OSPF peer must be configured as an OSPF stub router
Answer: A
NEW QUESTION # 348
Refer to the exhibit:
What does this value mean when it is received in XML?
- A. It indicates a break in a sequence
- B. It means a data field is blank
- C. It shows the ending of the script
- D. It indicates a value assigned by a network administrator to tag a route
Answer: B
Explanation:
In XML, a self-closing tag such as <tag/> indicates that the element does not contain any data, hence the data field is considered blank. This is a common way to represent empty elements in XML documents.
NEW QUESTION # 349
Refer to the exhibit.
Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?
- A. the wildcard mask network statement in OSPF of Router 2
- B. the hello timers on Router 1 and Router 2 to be different
- C. Router 1 to be an ABR
- D. the area numbers on Router 1 and Router 2 to be similar
Answer: D
Explanation:
The issue with Router 1 missing the route for Router 2's loopback 0 is likely due to the routers being configured in different OSPF areas. For OSPF to properly exchange routing information, routers within the same network should be configured in the same area. Therefore, the engineer should change the area numbers on Router 1 and Router 2 to be the same, ensuring they can exchange routes, including the route for Router 2' s loopback 0.
Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) documentation and study materials.
NEW QUESTION # 350
The engineering team at a large ISP has been alerted a customer network is experiencing high traffic congestion. After a discussion between the ISP and technical personnel at the customer site, the team agrees that traffic to the customer network that exceeds a specific threshold will be dropped. Which task must the engineer perform on the network to implement traffic policing changes?
- A. Enable Cisco Discovery Protocol on the interface sending the packets.
- B. Configure RSVP to reserve bandwidth on all interfaces when a path is congested.
- C. Set IP precedence values to take effect when traffic exceeds a given threshold.
- D. Enable Cisco Express Forwarding on the interfaces sending and receiving the packets.
Answer: C
Explanation:
* By setting IP precedence values (using Differentiated Services Code Point - DSCP) and configuring traffic policing, the network can enforce policies to drop or mark packets based on their priority. When traffic exceeds the specified threshold, the network can take appropriate actions.
Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) v1.0
NEW QUESTION # 351
Refer to the exhibit. Which configuration must be implemented on router R8 so that it will establish OSPF adjacency with R5?
R5#show run | s router ospf
router ospf 1
router-id 172.16.0.5
network 192.168.0.0 0.0.63.255 area 0
R5#show run int GigabitEthernet1.58
Building configuration....
Current configuration: 245 bytes
interface GigabitEthernet1.58
description LINK TO R8 Gi1.58
encapsulation dot1Q 58
ip address 192.168.58.5 255.255.255.0
ip mtu 1600
ip ospf network point-to-point
ip ospf 1 area 0.0.0.2
end
- A. router ospf 1
network 192.168.58.0 0.0.0.255 area 2
interface GigabitEthernet 1.58
ip mtu 1600 - B. router ospf 1
network 192.168.58.0 0.0.0.255 area 0.0.0.2
interface GigabitEthernet 1.58
ip ospf network point-topoint - C. router ospf 1
network 192.168.58.0 0.0.0.255 area 0.0.0.2
interface GigabitEthernet 1.58
ip mtu 1600
ip ospf network point-to-multipoint - D. router ospf 1
network 192.168.58.0 0.0.0.255 area 0.0.0.2
interface GigabitEthernet 1.58
ip mtu 1600
ip ospf network point-to-point
ip ospf 1 area 0
Answer: C
NEW QUESTION # 352
Refer to the exhibit.
Refer to the exhibit. ISP ASN 65100 provides Internet services to router CE-1 and receives customer prefix 198.18.18.0/24 via eBGP. An administrator for the ISP is now provisioning RTBH services to provide on-demand data-plane security for the customer's IP space. Which route-map configuration must the administrator apply to router RTBH-1 to complete the implementation of RTBH services to CE-1?
- A. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefixlist AS65001-PREFIXES
match community 99
set local-preference 200
set community no-advertise additive
set ip next-hop local-address
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - B. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community local-as additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - C. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community no-export additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - D. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community no-advertise additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY
Answer: C
NEW QUESTION # 353
......
Reliable CCNP Service Provider 350-501 Dumps PDF Apr 12, 2026 Recently Updated Questions: https://www.pass4sures.top/CCNP-Service-Provider/350-501-testking-braindumps.html
Pass Your Cisco 350-501 Exam with Correct 590 Questions and Answers: https://drive.google.com/open?id=1qssRwK04H-DZnLivA9QzK14G-I2WOkyS