[Aug 31, 2021] Updates Up to 365 days On Valid NSE7_PBC-6.4 Braindumps
Best QualityNSE7_PBC-6.4 Exam Questions Fortinet Test To Gain Brilliante Result
NEW QUESTION 15
Customer XYZ has an ExpressRoute connection from Microsoft Azure to a data center. They want to secure communication over ExpressRoute, and to install an in-line FortiGate to perform intrusion prevention system (IPS) and antivirus scanning.
Which three methods can the customer use to ensure that all traffic from the data center is sent through FortiGate over ExpressRoute? (Choose three.)
- A. Define a default route where the next hop IP is the FortiGate WAN interface
- B. Install FortiGate in Azure and build a VPN tunnel to the data center over ExpressRoute
- C. Enable the redirect option in ExpressRoute to send data center traffic to a user-defined route table
- D. Configure the gateway subnet as the subnet in the user-defined route table
- E. Configure a user-defined route table
Answer: A,C,D
NEW QUESTION 16
Refer to the exhibit.
Your senior administrator successfully configured a FortiGate fabric connector with the Azure resource manager, and created a dynamic address object on the FortiGate VM to connect with a windows server in Microsoft Azure. However, there is now an error on the dynamic address object, and you must resolve the issue.
How do you resolve this issue?
- A. In the Microsoft Azure portal, set the correct tag values for the windows server.
- B. In the Microsoft Azure portal, access the windows server, obtain the private IP address, and assign the IP address under the FortiGate-VM AzureLab address object.
- C. Delete the address object and recreate a new address object with the type set to FQDN.
- D. Run diagnose debug application azd -l on FortiGate.
Answer: B
NEW QUESTION 17
Which two statements about Microsoft Azure network security groups are true? (Choose two.)
- A. Network security groups can be applied to subnets only.
- B. Network security groups can be applied to subnets and virtual network interfaces.
- C. Network security groups are stateless inbound and outbound rules used for traffic filtering.
- D. Network security groups are a stateful inbound and outbound rules used for traffic filtering.
Answer: A,D
NEW QUESTION 18
Which two statements about Microsoft Azure network security groups are true? (Choose two.)
- A. Network security groups can be applied to subnets only.
- B. Network security groups can be applied to subnets and virtual network interfaces.
- C. Network security groups are stateless inbound and outbound rules used for traffic filtering.
- D. Network security groups are a stateful inbound and outbound rules used for traffic filtering.
Answer: A,D
Explanation:
Explanation/Reference: https://docs.microsoft.com/en-us/azure/virtual-network/network-security-groups-overview
NEW QUESTION 19 
Refer to the exhibit. Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)
- A. Use ExpressRoute to interconnect the hub VNets and spoke VNets.
- B. Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.
- C. Configure VNet peering between the hub and spokes.
- D. Configure VNet peering between the spokes only.
Answer: A,C
NEW QUESTION 20
Which statement about FortiSandbox in Amazon Web Services (AWS) is true?
- A. FortiSandbox in AWS uses Windows virtual machines (VMs) to inspect files.
- B. In AWS, virtual machines (VMs) that inspect files do not have to be reset after inspecting a file.
- C. In AWS, virtual machines (VMs) that inspect files are constantly up and running.
- D. FortiSandbox in AWS can have a maximum of eight virtual machines (VMs) that inspect files.
Answer: C
NEW QUESTION 21 
Refer to the exhibit. The exhibit shows a topology where multiple connections from clients to the same FortiGate-VM instance, regardless of the protocol being used, are required.
Which two statements are correct? (Choose two.)
- A. The design shows an active-active FortiGate-VM architecture.
- B. The Cloud Load Balancer Session Affinity setting should be changed to CLIENT_IP.
- C. The Cloud Load Balancer Session Affinity setting should use the default value.
- D. The design shows an active-passive FortiGate-VM architecture.
Answer: A,B
NEW QUESTION 22 
Refer to the exhibit. Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)
- A. 172.29.32.71is set as a next hop IP for all routes under FortigateUDR-01
- B. The network interface of the active unit moves to itself
- C. SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT-
0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01 - D. SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01
Answer: A,C
NEW QUESTION 23
Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)
- A. A multiple VPC deployment utilizing a transit VPC topology
- B. A single VPC deployment with multiple subnets and a NAT gateway
- C. A multiple VPC deployment utilizing a transit gateway
- D. A single VPC deployment with multiple subnets
Answer: A,D
Explanation:
Explanation/Reference: https://www.fortinet.com/content/dam/fortinet/assets/white-papers/wp-aws-reference- architecture.pdf
NEW QUESTION 24
Refer to the exhibit.
You attempted to deploy the FortiGate-VM in Microsoft Azure with the JSON template, and it failed to boot up. The exhibit shows an excerpt from the JSON template.
What is incorrect with the template?
- A. The LUN ID is not defined.
- B. The caching parameter should be None.
- C. The CreateOptions parameter should be FromImage.
- D. FortiGate-VM does not support managedDisk from Azure.
Answer: C
NEW QUESTION 25
You are deploying Amazon Web Services (AWS) GuardDuty to monitor malicious or unauthorized behaviors related to AWS resources. You will also use the Fortinet aws-lambda-guardduty script to translate feeds from AWS GuardDuty findings into a list of malicious IP addresses. FortiGate can then consume this list as an external threat feed.
Which Amazon AWS services must you subscribe to in order to use this feature?
- A. Inspector, Shield, GuardDuty, S3, and DynamoDB.
- B. WAF, Shield, GuardDuty, S3, and DynamoDB.
- C. GuardDuty, CloudWatch, S3, and DynamoDB.
- D. GuardDuty, CloudWatch, S3, Inspector, WAF, and Shield.
Answer: D
NEW QUESTION 26
Refer to the exhibit.
Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)
- A. Use ExpressRoute to interconnect the hub VNets and spoke VNets.
- B. Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.
- C. Configure VNet peering between the hub and spokes.
- D. Configure VNet peering between the spokes only.
Answer: A,C
NEW QUESTION 27
You have been asked to develop an Azure Resource Manager infrastructure as a code template for the FortiGate-VM, that can be reused for multiple deployments. The deployment fails, and errors point to the storageAccount name.
Which two are restrictions for a storageAccount name in an Azure Resource Manager template? (Choose two.)
- A. The storageAccount name must be in lowercase.
- B. The storageAccount name must use special characters.
- C. The storageAccount name must contain between 3 and 24 alphanumeric characters.
- D. The uniqueString() function must be used.
Answer: A,D
NEW QUESTION 28
You need to deploy FortiGate VM devices in a highly available topology in the Microsoft Azure cloud. The following are the requirements of your deployment:
* Two FortiGate devices must be deployed; each in a different availability zone.
* Each FortiGate requires two virtual network interfaces: one will connect to a public subnet and the other will connect to a private subnet.
* An external Microsoft Azure load balancer will distribute ingress traffic to both FortiGate devices in an active- active topology.
* An internal Microsoft Azure load balancer will distribute egress traffic from protected virtual machines to both FortiGate devices in an active-active topology.
* Traffic should be accepted or denied by a firewall policy in the same way by either FortiGate device in this topology.
Which FortiOS CLI configuration can help reduce the administrative effort required to maintain the FortiGate devices, by synchronizing firewall policy and object configuration between the FortiGate devices?
- A. config system sdn-connector
- B. config system session-sync
- C. config system ha
- D. config system auto-scale
Answer: C
NEW QUESTION 29
An Amazon Web Services (AWS) auto-scale FortiGate cluster has just experienced a scale-down event, terminating a FortiGate in availability zone C.
This has now black-holed the private subnet in this availability zone.
What action will the worker node automatically perform to restore access to the black-holed subnet?
- A. The worker node moves the virtual IP of the terminated FortiGate to a running FortiGate on the worker node's private subnet interface.
- B. The worker node modifies the route table applied to the black-holed subnet changing its default route to point to a running FortiGate on the worker node's private subnet interface.
- C. The worker node migrates the subnet to a different availability zone.
- D. The worker node applies a route table from a non-black-holed subnet to the black-holed subnet.
Answer: C
NEW QUESTION 30
Which three properties are configurable Microsoft Azure network security group rule settings? (Choose three.)
- A. Destination port ranges
- B. Source and destination IP ranges
- C. Source port ranges
- D. Action
- E. Sequence number
Answer: A,C,D
NEW QUESTION 31
......
Focus on NSE7_PBC-6.4 All-in-One Exam Guide For Quick Preparation: https://www.pass4sures.top/NSE-7-Network-Security-Architect/NSE7_PBC-6.4-testking-braindumps.html