350-601 Practice Dumps - Verified By Pass4sures Updated 139 Questions
Updated 350-601 Exam Dumps - PDF Questions and Testing Engine
Cisco 350-601: Implementing and Operating Cisco Data Center Core Technologies Certified Professional salary
The average salary of a Cisco 350-601: Implementing and Operating Cisco Data Center Core Technologies Certified Expert in:
- India - 15,42,327 INR
- United State - 80,123 USD
- England - 65,632 POUND
- Europe - 65,347 EURO
NEW QUESTION 40
Refer to the exhibit.
Which statement about the default gateway configuration of the vPC is true?
- A. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.
- B. N7K-2 acts as the default gateway for all traffic.
- C. N7K-1 acts as the default gateway for all traffic.
- D. Either switch can act as the active default gateway.
Answer: D
NEW QUESTION 41
An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of UCS C-series rack mount server.
- A. C2 state
- B. C6 Retention
- C. C0/C1 state
- D. C6 non-Retention
Answer: C
NEW QUESTION 42
Refer to the exhibit.
What is the result of implementing this configuration?
- A. The Fibre Channel interface is configured for SPAN.
- B. The Fibre Channel interface is configured for synchronization distribution.
- C. The Fibre Channel interface is configured for FSPF.
- D. The Fibre Channel interface is configuration for source distribution.
Answer: A
NEW QUESTION 43
A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature. Which component is upgraded during the infrastructure firmware upgrade stage?
- A. Cisco IMC
- B. I/O module
- C. BIOS
- D. Adapter
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0_chapter_0100.html
https://www.youtube.com/watch?v=g-4OgYigvRI
NEW QUESTION 44
Refer to the exhibit.
Which type of backup is required to restore a Cisco UCS configuration?
- A. logical configuration
- B. full state
- C. all configuration
- D. system configuration
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-0-2/b_CLI_Config_Guide_
NEW QUESTION 45
Refer to the exhibit.
What is configured as a result of running these commands?
- A. strict unicast RPF
- B. IP Source Guard
- C. reverse lookup for outbound packets
- D. loose unicast RPF
Answer: A
Explanation:
Explanation
NEW QUESTION 46
Which two statements about the process at upgrading an EPLD on a Cisco MDS 9000 Series Switch are correct? (Choose two.)
- A. The EPLDs for all the modules on a switch must be upgraded at the same time.
- B. EPLDs can be upgraded without replacing the hardware.
- C. An upgrade verification identifies the impact of each EPLD upgrade.
- D. EPLDs can be upgraded only to the latest EPLD image.
- E. EPLD upgrades can be completed without powering down the module during the upgrade.
Answer: B,C
Explanation:
Section: Compute
NEW QUESTION 47
A network engineer is adding a Cisco HyperFlex data platform to the Cisco Intersight management portal.
Which two components are required for Intersight to claim the Cisco HyperFlex data platform? (Choose two.)
- A. device claim code
- B. device ID
- C. device FQDN
- D. device serial number
- E. device public IP address
Answer: A,B
Explanation:
Section: Compute
NEW QUESTION 48 
Refer to the Exhibit.
An engineer is connecting a Cisco MDS 9700 series multilayer director to a downstream Cisco Nexus 5672UP switch. Which command set must be used to complete the configuration?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: B
NEW QUESTION 49
An engineer performs a set of configuration changes for the vPC domain using Session Manager. Which two commands are used to verify the configuration and apply the device changes when no errors are returned?
(Choose two)
- A. checkpoint
- B. verify
- C. write
- D. apply
- E. commit
Answer: B,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuratio
NEW QUESTION 50
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.
Answer:
Explanation:
Explanation
install the virtualization feature set
Enable the virtualization feature set
Configure the port profile
Configure support for VNTag mode on the interface that connects to the server.
Configure the server to support NIV mode
Configure the vNICs of the server
NEW QUESTION 51
Refer to the exhibit.
Service degradation is reported on a VM that is deployed on a Cisco UCS blade server. The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12.
Which two commands are needed to complete the configuration? (Choose two.)
- A. UCS-A /eth-traffic-mon/fabric/eth-mon-session' # create dest-interface 2 12
- B. UCS-A /org/service-profile/vnic/mon-src* # set direction both
- C. UCS-A /eth-traffic-mon/fabric/eth-mon-session # activate
- D. UCS-A /org/service-profile/vnic/mon-src* # set direction receive transmit
- E. UCS-A /eth-traffic-mon/fabric/eth-mon-session* # create eth-mon-session/dest-interface 2 12
Answer: A,B
NEW QUESTION 52
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error massage. Which method can be used before application profile can be configured?
- A. POST to aaaRefresh
- B. GET to aaaListDomains
- C. POST to aaaLogin
- D. POST to aaaLogout
Answer: C
NEW QUESTION 53
An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus 7000 series switch. What is the cause of the upgrade being disruptive?
- A. Change of the configuration settings or the network connections during the upgrade process
- B. Attempt to simultaneously upgrade more than three cards
- C. The kickstart image is installed by using the install all kickstart image system image command
- D. The show install all impact command is not issued Before the upgrade
Answer: A
NEW QUESTION 54
Refer to the exhibit.
What is the result of implementing this configuration?
- A. The timeout value on the TACACS+ server is 10 seconds.
- B. The TACACS+ server uses the type-6 encrypted format.
- C. The switch queries the TACACS+ server by using an encrypted text PAP login.
- D. The switch queries the TACACS+ server by using a clear text PAP login.
Answer: D
NEW QUESTION 55
......
New (2021) Cisco 350-601 Exam Dumps: https://www.pass4sures.top/CCNP-Data-Center/350-601-testking-braindumps.html
Best Way To Study For Cisco 350-601 Exam Brilliant 350-601 Exam Questions PDF: https://drive.google.com/open?id=16mz6g57iQ5_njr-fweotTTbvZaQgGMQ3