[2024] Practice with these NS0-593 dumps Certification Sample Questions
Get Instant Access of 100% REAL NS0-593 DUMP Pass Your Exam Easily
NEW QUESTION # 17
You are trying to deploy a Connector in the AWScloud from NetApp Cloud Manager. The deployment fails
and shows the message 'Insufficient permissions to deploy Cloud Connector". You have verified the AWS
access key and the AWS secret key.
In this scenario, what Is the reason that the deployment failed?
- A. The Connector can be deployed only inAWS GovCloud (US).
- B. No AWS Marketplace subscription is associated with Cloud Manager.
- C. The user lacks the permission to deploy within Cloud Manager.
- D. The required Identity and Access Management (IAM) policies were not Installed.
Answer: C
NEW QUESTION # 18
A customer's storage administrator Informs you about the deactivated Automatic Switchover (AUSO) feature
on their MetroCluster IP environment.
What Information would you tell your customer in this scenario?
- A. The AUSO feature cannot be activated due to a non-mirrored aggregate.
- B. This is a configuration failure, you can activate that feature for the customer.
- C. A faulty link automatically deactivated the AUSO feature.
- D. The AUSO feature is not available in Metrocluster IP installations by design.
Answer: A
NEW QUESTION # 19
You are deploying NetApp ONTAP Select. When trying to add VMware vCenter to the inventory, you receive
the message shown below.
Credential authentication failed for x.x.x.x with: HostConnectionFailed
In this scenario, how would you correct this problem?
- A. Change the IP address of the ONTAP Select Deploy VM.
- B. Change the IP address of the vCenter server.
- C. Change the gateway address of the ONTAP Select Deploy VM.
- D. Change the vCenter password.
Answer: D
NEW QUESTION # 20 
Referring to the exhibit, from which delay center is most of the latency for voll?
- A. Data
- B. Network
- C. Disk
- D. NVRAM
Answer: B
NEW QUESTION # 21
You have a 4-node NetApp ONTAP 9.8 cluster with an AFF A400 HA pair and a FAS8300 HA pair with 16
TB NL-SAS drives. You are asked to automatically tier 150 TB of Snapshot copy data from the AFF A400
aggregates to the FAS8300.
In this scenario, which ONTAP license must be added to the cluster to accomplish this task?
- A. VE license
- B. TPM license
- C. S3 license
- D. FabricPool license
Answer: B
NEW QUESTION # 22
When an administrator tries to create a share for an existing volume named voll, the process fails with an error.
Referring to the exhibit, what Is the reason for the error?
- A. The volume must have a type of DP.
- B. The CIFS service is not in workgroup mode.
- C. The volume has not beenmounted.
- D. The CIFS service is not authenticating properly with the domain controller.
Answer: C
NEW QUESTION # 23
Your customer Informs you about SnapMlrror problems after upgrading NetApp ONTAP software to a newer
version. After investigating the event logs and the SnapMirror history, you see information about delayed
updates of the SnapMirror relationships.
How would your customer prevent such problems in the future?
- A. Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.
- B. Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.
- C. Quiesce the SnapMirror relationships before upgrading the ONTAP software.
- D. Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.
Answer: D
NEW QUESTION # 24
Which two statements about NetApp Cloud Volumes ONTAP licenses ate true? (Choose two.)
- A. Capacity-based license packages support only single-node configurations.
- B. Having an Essentials package enables you to convert to another licensing option.
- C. BYOL licenses are purchased directly from NetApp.
- D. AWS Marketplace contracts cannot be mixed with BYOL.
Answer: A,C
NEW QUESTION # 25
A customer reports that some of their client computers are unable to access a FlexGroup over CIFS. This
problem involves only their older Windows XP clients and some printers and scanners.
In this scenario, which statement Is correct?
- A. FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.
- B. These systems use the SMQI protocol which Is an unsupported feature in FlexGroup
- C. These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.
- D. FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not
support.
Answer: D
NEW QUESTION # 26
A customer reports that some of their client computers are unable to access a FlexGroup over CIFS. This problem involves only their older Windows XP clients and some printers and scanners.
In this scenario, which statement Is correct?
- A. FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not support.
- B. FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.
- C. These systems use the SMQI protocol which Is an unsupported feature in FlexGroup
- D. These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.
Answer: A
Explanation:
FlexGroup requires CIFS shares to use the Continuously Available Feature, which enables transparent failover and recovery of SMB sessions in the event of a node failure or takeover. This feature is only supported by Windows 8 and later clients, and some printers and scanners may not support it either. Therefore, these older Windows XP clients and some printers and scanners are unable to access a FlexGroup over CIFS. Reference = Supported and unsupported configurations for FlexGroup volumes, NetApp ONTAP FlexGroup volumes - Best practices and implementation guide (page 24)
NEW QUESTION # 27
A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G
Ethernet card in slot 4 for this purpose. The link comes up fine on node 2,but it will not come up on node 1.
You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit.
What is the cause of the customer's problem?
- A. The cable is plugged in upside down.
- B. The ports are configured for 4x10Gbit instead of 40Gbit.
- C. The incorrect cable is used.
- D. The port has an incorrect SFP inserted.
Answer: B
NEW QUESTION # 28
An administrator receives the following error message:
What are two causes for this error? (Choose two.)
- A. A disk is falling.
- B. There is excessive SATA HDD load.
- C. An SSD disk is performing garbage collection to create a dense data layout.
- D. There Is excessive SSD load causing the wear leveling to become unbalanced.
Answer: C,D
Explanation:
The error message "wafl.cp.toolong:error" indicates that a WAFL consistency point (CP) took longer than 30 seconds to complete. A CP is a process that flushes the data from the NVRAM buffer to the disk. A long CP can cause latency and performance issues for the system1 One possible cause for a long CP is excessive SSD load causing the wear leveling to become unbalanced. Wear leveling is a technique that distributes the write operations evenly across the SSD cells to extend the lifespan of the SSD. If some SSD cells are written more frequently than others, the wear leveling will become unbalanced and the SSD performance will degrade2 Another possible cause for a long CP is an SSD disk performing garbage collection to create a dense data layout. Garbage collection is a process that reclaims the space occupied by invalid or deleted data on the SSD. Garbage collection can improve the write performance and storage efficiency of the SSD, but it can also consume CPU and disk resources and cause long CPs3 A disk failing or being failed is not a likely cause for a long CP, because the system will automatically mark the disk as failed and remove it from the aggregate. The system will also initiate a disk reconstruction or a RAID scrub to restore the data protection and redundancy4 There is no evidence that the system has SATA HDDs, so there is no reason to assume that there is excessive SATA HDD load. Moreover, SATA HDDs are usually used for secondary or backup storage, not for primary or performance-sensitive workloads5 Reference:
1: Are long Consistency Points (wafl.cp.toolong) normal? - NetApp Knowledge Base 2: How to troubleshoot SSD performance issues - NetApp Knowledge Base 3: How to troubleshoot SSD garbage collection issues - NetApp Knowledge Base 4: How to troubleshoot disk failures and replacements - NetApp Knowledge Base 5: ONTAP 9 - Hardware Universe - The Open Group
NEW QUESTION # 29
You have a 4-node NetApp ONTAP 9.8 cluster with an AFF A400 HA pair and a FAS8300 HA pair with 16 TB NL-SAS drives. You are asked to automatically tier 150 TB of Snapshot copy data from the AFF A400 aggregates to the FAS8300.
In this scenario, which ONTAP license must be added to the cluster to accomplish this task?
- A. FabricPool license
- B. VE license
- C. TPM license
- D. S3 license
Answer: A
Explanation:
FabricPool is an ONTAP feature that enables tiering of cold data from SSD aggregates to low-cost object storage, either on-premises or in the cloud1. FabricPool requires a license to be installed on the cluster, and the license type depends on the cloud tier being used2. In this scenario, the cloud tier is another ONTAP cluster (FAS8300), which is not supported by the new Cloud Tiering license that is used for most FabricPool configurations3. Therefore, the old FabricPool license that is retained for dark sites or MetroCluster systems using FabricPool Mirror must be used3. The FabricPool license defines the amount of capacity that can be tiered to the cloud tier, and it can be increased by add-on orders4. Reference:
1: FabricPool overview5
2: FabricPool requirements6
3: Install a FabricPool license2
4: ONTAP FabricPool (FP) Licensing Overview1
NEW QUESTION # 30
Your customer has mounted an NFS SVM from a Linux client unci performance is very poor. The customer is certain that they have jumbo frames enabled. They have verified an MTU of 9000 on both the Linux client and the broadcast domain on the NetApp ONTAP 9.8 cluster.
Referring to the exhibit, which ONTAP command will help isolate a possible MTU mismatch?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
The ONTAP command that will help isolate a possible MTU mismatch is network ping -lif jumbo_01 -vserver svm1_cluster1 -destination 192.168.0.210 -disallow-fragmentation true -packet-size 5000. This command will send a ping packet of 5000 bytes from the logical interface (LIF) jumbo_01 to the destination IP address 192.168.0.210, without allowing fragmentation. If the ping fails, it means that there is an MTU mismatch somewhere along the path. If the ping succeeds, it means that the MTU is consistent and the problem is elsewhere12. Reference: 1: Check the MTU network setting on the storage system | NetApp Documentation 2: How to adjust the MTU for an ONTAP interface - NetApp Knowledge Base
NEW QUESTION # 31
A customer with an FC MetroCluster configuration that is running NetApp ONTAP 9.8 software experienced a site outage and wants to know why the MetroClusler configuration did not switch over to the other site.
What are two reasons for this problem? (Choose two.)
- A. The ISLs were down between the sites.
- B. An ISL link was not operating at 16Gbps.
- C. There was a failed PSU in the switchover site.
- D. The site had unmirrored aggregates.
Answer: A,D
Explanation:
A MetroCluster configuration requires the ISLs between the sites to be up and running for the switchover to occur. If the ISLs are down, the MetroCluster configuration cannot communicate with the other site and cannot perform the switchover. Additionally, a MetroCluster configuration requires all aggregates to be mirrored across the sites for data protection and availability. If a site has unmirrored aggregates, the switchover will fail because the data on those aggregates will not be accessible from the other site. Reference = Configuring the MetroCluster software in ONTAP, NetApp MetroCluster FC for ONTAP 9.8
NEW QUESTION # 32
Your customer complains about missing volume snapshot copies on a SnapMlrror destination. While
investigating this case, you notice an executed SnapMirror resync operation in the event logs of the system.
In this scenario, what Is the cause of this problem?
- A. Snapshot copies were manually removed from the destination after the resync.
- B. The autodelete option removed Snapshot copies before the resync.
- C. Newer Snapshot copies than the common snapshot that was chosen for resync were removed
automatically at the destination. - D. NetApp ON TAP System Manager removed these snapshot copies due to a snapshot schedule.
Answer: A
NEW QUESTION # 33
You receive the panic message shown in the exhibit.
In this scenario, which component should you troubleshoot first?
- A. the MetroCluster FC-Vl card in slot 6
- B. the memory module in slot 1
- C. the PCI card in slot 3
- D. the CPU
Answer: D
NEW QUESTION # 34
Your customer complains that u host will constantly report losing a connection to the iSCSl target and then report that the session was reestablished.
As shown in the exhibit, what is a cause of this flapping?
- A. A host with an IP address of 172.20.10.80 and a second IP address of 10.10.20.60 is accessing different LUNs.
- B. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the same IQN.
- C. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are in different initiator groups.
- D. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are accessing the same LUN.
Answer: B
Explanation:
IQN stands for iSCSI Qualified Name, which is a unique identifier for an iSCSI initiator or target1.
ONTAP uses IQN to authenticate and authorize iSCSI sessions2.
If two hosts have the same IQN, they will cause a conflict and ONTAP will reject the new session request from the second host3.
This will result in the host losing the connection to the iSCSI target and then reporting that the session was reestablished, as shown in the exhibit.
To avoid this problem, each host should have a unique IQN. Reference:
iSCSI Qualified Name (IQN) - NetApp
iSCSI authentication and authorization - NetApp
Troubleshooting iSCSI issues - NetApp
[Configuring iSCSI initiators - NetApp]
NEW QUESTION # 35
You have a customer complaining of long build times from their NetApp ONTAP-based datastores. They provided you packet traces from the controller and client. Analysis of these traces shows an average service response time of 1 ms. QoS output confirms the same. The client traces are reporting an average of 15 ms in the same time period.
In this situation, what would be your next step?
- A. The cluster is responding slowly and requires further investigation using performance archives.
- B. A sync core should be triggered.
- C. The cluster interconnects should be investigated.
- D. The client that reports high latency should be investigated.
Answer: D
Explanation:
The question describes a scenario where the controller and client have a significant difference in their reported latency for the same datastores.
The controller's latency is 1 ms, which is within the normal range for ONTAP-based datastores1.
The client's latency is 15 ms, which is much higher than the controller's latency and could indicate a performance issue on the client side2.
Therefore, the next step is to investigate the client that reports high latency and identify the possible causes, such as network congestion, misconfiguration, resource contention, or application issues23.
The other options are not relevant or appropriate for this scenario, because:
A) The cluster is not responding slowly, as the controller's latency is low and QoS output confirms the same.
C) The cluster interconnects are not likely to be the cause of the latency difference, as they are used for communication between nodes within the cluster, not between the controller and the client4.
D) A sync core is a diagnostic tool that captures the state of the system at a given point in time, and is not a troubleshooting step for performance issues5. Reference:
ONTAP 9 Performance - Resolution Guide - NetApp Knowledge Base
Performance troubleshooting - NetApp
How to troubleshoot performance issues in Data ONTAP 8 7-mode
Cluster interconnect network - NetApp
How to generate a sync core on a node - NetApp
NEW QUESTION # 36
After a motherboard replacement on a NetApp AFF A300 in a SAN environment, the customer states that
ports 0e and 0f are unable toconnect to the fabric. The ports report "offline".
What would you examine first to troubleshoot the issue?
- A. vserver fcp wwpn-alias show command output
- B. vserver fcp interface show command output
- C. system node hardware unified-connect show command output
- D. storage port show command output
Answer: D
NEW QUESTION # 37
......
Free Exam Files Downloaded Instantly: https://www.pass4sures.top/NetApp-NCSE/NS0-593-testking-braindumps.html
NS0-593 Free Exam Questions with Quality Guaranteed: https://drive.google.com/open?id=1Hbftz8NzLiaxQGmO9P69jlA8DejgX3_a