[2024] Free MB-320 Exam Dumps to Pass Exam Easily
MB-320 Exam Dumps, MB-320 Practice Test Questions
Microsoft MB-320 Exam Syllabus Topics:
| Topic | Details |
|---|---|
Set up and configure Manufacturing (30-35%) | |
| Implement and test the Production control module | - identify components of unified manufacturing - validate the interconnectivity between General Ledger and the Production Control modules - implement Production control parameters, Production orders, and Life Cycle - implement and manage subcontracting processes - configure and manage costing sheets - implement and manage work calendars - configure inventory, product, storage, and tracking dimensions in Production - implement and manage resources and resource groups - create and manage operations and routes |
| Configure and manage a product configuration model | - create and manage product configuration model components - create and manage products - create calculations for product configuration models - configure and manage constraints - configure and manage BOM lines and route operations - configure and manage pricing for production configuration models - describe the purpose and capabilities of the product configuration models - customize a product configuration model - configure production groups and production pools |
Create and manage Production and Lean orders (25-30%) | |
| Create common components of production and Lean orders | - create and configure Catch Weight items - create value streams and production flows - configure production flow costing - create and manage Kanbans - create and manage Formulas - create and process Batch, Production, and Lean orders - set up and maintain commodity pricing - apply Product Compliance standards - identify items and substitute items within a bill of material (BOM) or Formula |
| Manage scheduling and subcontracting | - implement processes to manage Scrap and Waste for a Discrete order - implement production scheduling and subcontracting and production flow costing - implement activity-based subcontracting - create and maintain project items and item tasks |
Professionals who pass the Microsoft MB-320 exam can demonstrate their expertise in implementing and managing the manufacturing module of Dynamics 365 Supply Chain Management. These professionals can work as Dynamics 365 Supply Chain Management consultants, solution architects, business analysts, or project managers. Passing MB-320 exam can also help individuals advance their careers and open up new job opportunities. The Microsoft MB-320 exam is an excellent way for professionals to validate their skills and knowledge in the manufacturing module of Dynamics 365 Supply Chain Management.
NEW QUESTION # 82
A company plans to account for indirect costs related to materials used to manufacture products.
The items used to manufacture products have surcharge rates that depend on the type of product being used.
You need to set up the costing sheet to include surcharges for specific items.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 83
A company plans to implement Dynamics 365 for Finance and Operations.
You need to determine which manufacturing solutions to use.
Which manufacturing solution should you use? To answer, drag the appropriate setting to the correct drop targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 84
You need to configure the system to meet the requirements.
What should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 85
A company sells chemicals that require special instructions for disposal and remediation due to toxicity regulatory requirements.
The company requires that when a sales order's packing slip is printed for a product that contains a toxic chemical, the instructions must also be printed for inclusion in the shipment.
You need to configure the system to meet the requirements.
Which configurations should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/hazmat-items
NEW QUESTION # 86
A company makes lubricants and greases used in the automotive industry. The company plans to implement Dynamics 365 for Finance and Operations. The system must meet the following requirements:
* Schedule the batch production of products.
* Plan for inventory fluctuations of ingredients that are used across different products.
* Schedule delivery of amounts of proprietary compounds used during production from vendors to keep production runs on schedule and eliminating excess stock on hand or delayed production.
The company is starting the initial setup of their Dynamics 365 environment.
Answer:
Explanation:
NEW QUESTION # 87
A customer produces light projection toys for holiday decorations throughout the year. Vendors have negotiated rebate agreements as a condition of their contract. The contract also contains the visual templates required for the customer to use in a season.
Vendor rebate agreements must only be applied if the following requirements are met:
* Units of measure for deliverables are the same unit of measure as on the agreement.
* The agreement is valid as of the date a purchase order is generated.
You need to configure the vendor rebate agreements. What should you do?
- A. Set the Cumulative purchase by field value to the beginning of the season date.
- B. Set the Calculation date type field value to Created.
- C. Set the Cumulative purchase by field value to the end of the season date.
- D. Set the Calculation date type field value to Requested delivery.
Answer: B
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/procurement/vendor-rebates
NEW QUESTION # 88
You are the product manager at a distribution company. You are responsible for managing product compliance standards and reporting.
Chemical product, C00D1 can be sold in all parts of the United States except for the state of California.
You need to set up these compliance requirements for C0001.
Which four actions should be performed in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/dynamicsax-2012//restricted-products-item-by-country-or-state-form?redirected
NEW QUESTION # 89
You work for a gem wholesaler that sells raw diamonds. Diamonds are purchased and sold in individual boxes but weighed and inventoried in carats.
You are setting up a catch weight item for diamonds. Each box of diamonds must be tracked by its individual container weight.
You need to set up this item as a full visibility catch weight item.
Which two steps must you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create an inter-class unit of measure conversion between boxes and carats.
- B. Assign it a Serial number group with per qty. defined as 1.
- C. Assign the item a Tracking dimension group with active serial number control.
- D. Assign a Tracking dimension group with batch number as the only active tracking dimension.
Answer: A,C
Explanation:
References:
https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/create-a-catch-weight-item-with-full-visibility
NEW QUESTION # 90
A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB. ProductA is the primary ingredient. You use ProductB to adjust the concentration of active ingredients in the lotion.
You need to ensure that the lotion final product has a consistent concentration of anti-inflammatory agents.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Set the formula line type of ProductA to Active.
- B. Set the formula line type of ProductA to Compensating.
- C. Set the formula line type of ProductC to None.
- D. Set the formula line type of ProductB to Compensating.
- E. Set the formula line type of ProductB to Active.
Answer: A,D
NEW QUESTION # 91
A company plans to implement routing and route postings.
You must direct postings of route cards based upon the route groups at Report as finished.
You set the start default order setting for route posting to Never and the Report as finished setting to Route Group Dependent.
You set up the route group as shown below.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 92
A customer produces light projection toys for holiday decorations throughout the year. The production process creates the projections toy at the following work cells stands, main assembly, electric, visuals, and packaging.
Vendors must create visual templates for the company for each season. They must manage the transfer of visual templates to the warehouse. Each transfer for each vendor must use the same purchase agreement.
You need to configure the subcontracted transfer activity.
What should you do?
- A. Set the transfer activity Freighted by value to Carrier. Ensure that purchase agreements include the vendor ID of the warehouse.
- B. Set the transfer Freighted by value to . Ensure that purchase agreements include the vendor ID of the vendor.
- C. Set the transfer activity Freighted by value to Recipient. Ensure that purchase agreements include the vendor ID of the vendor.
- D. Set the transfer activity Freighted by value to Recipient. Ensure that purchase agreements include the vendor ID of the warehouse.
- E. Set the transfer activity Freighted by value to Shipper. Ensure that purchase agreements include the vendor ID of the warehouse.
- F. Set the transfer Freighted by value to . Ensure that purchase agreements include the vendor ID of the vendor.
Answer: D
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/activity-based
NEW QUESTION # 93
A company plans to implement routing and route postings.
You must direct postings of route cards based upon the route groups at Report as finished.
You set the start default order setting for route posting to Never and the Report as finished setting to Route Group Dependent.
You set up the route group as shown below.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 94
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company implements Dynamics 365 Supply Chain Management for their Lean manufacturing environment.
There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.
You need to ensure that the engineering change takes affect at the end of the month.
Solution:
* Edit the existing production flow and set the expiration date to the end of the month.
* Using the existing production flow, create a production flow and version. Set the expiration date to the end of the month. Create an activity for the new process step and add it in the proper sequence.
* Create a Kanban rule that uses the last day of the month as the effective date.
* Edit the existing Kanban rule. Set the expiration date to the end of the month. Set the new Kanban rule as the replacement Kanban rule.
* Activate the new production flow.
Does the solution meet the goal?
- A. Yes
- B. No
Answer: A
NEW QUESTION # 95
A company uses Dynamics 365 Process manufacturing.
Employees work a half day so that they can attend a company event. You have a rush order that must be completed that same day.
After reviewing the net requirements of the batch order, only 400 of the total quantity of 1400 units must be completed today. The production manager must retain the original batch number as the quantity of 400. The original batch number must appear on documentation for the customer.
You need to split the batch order into two orders.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 96
A process manufacturing company is implementing Dynamics 365 for Finance and Operations. The company will use multiple process manufacturing functionalities including by-products.
You need to configure by-product formula allocation methods.
Which methods should you use? To answer, drag the appropriate by-product burden allocation methods to the correct scenarios. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 97
You are the product manager at a distribution company. You are responsible for managing product compliance standards and reporting.
Chemical product, C00D1 can be sold in all parts of the United States except for the state of California.
You need to set up these compliance requirements for C0001.
Which four actions should be performed in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 98
A manufacturing plant uses Lean manufacturing. Operators process Kanban consumption manually by using a mobile device.
The production team must use automatic empty registration for some of the event Kanbans. Registration must occur when the last job of a Kanban is completed.
You need to update the Kanban rule to meet this requirement.
What Kanban setting should you update?
- A. Set a fixed Kanban quantity
- B. Select to register as empty when handling units are received
- C. Select to manually register as empty
- D. Select to register as empty when the source requirement is registered
Answer: B
Explanation:
Section: Create and manage production and lean orders
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/backflush-costing
NEW QUESTION # 99
You are a functional consultant for Contoso Entertainment System USA (USMF).
USMF plans to categorize a new night shift in its factory.
You need to create a new cost category named NightShift for the night shift.
To complete this task, sign in to Dynamics 365 portal.
Answer:
Explanation:
See explanation below.
* Go to Organization Administration > Categories > Shared Categories.
* Click New to create a new shared category.
* Give the shared category an ID and a name (NightShift).
* Select the Can be used in Production checkbox and close the window.
* Back in Organization Administration Categories.
* Click New to create a new category.
* Select the Category ID from the shared category.
* The category will inherit the ID and name (Nightshift) from the shared category.
* Click Close to close the window.
NEW QUESTION # 100
A company plans to implement routing and route postings.
You must direct postings of route cards based upon the route groups at Report as finished.
You set the start default order setting for route posting to Never and the Report as finished setting to Route Group Dependent.
You set up the route group as shown below.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 101
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A manufacturing plant uses Lean process. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.
You need to create a subcontracting activity for the painting service.
Solution:
1.) Create a purchase agreement for the subcontracting vendor that contains the pricing information for SP-01
2.) Create a vendor resource and a work cell for outsourced painting, then add the resource to the work cell
3.) Create a production flow process activity using the painting work cell and the service item as the picking activity
4.) Create a service term on the activity to tie the purchase agreement to the activity Does this solution meet the goal?
- A. Yes
- B. No
Answer: A
Explanation:
Section: Create and manage production and lean orders
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/activity- based-subcontracting
NEW QUESTION # 102
A company is looking to use Dynamics 365 for Finance and Operations.
The company is in the process of redesigning and retooling an existing manufacturing plant to group similar, cellular operations to improve efficiency and minimize wasted time between operations. They want to locate raw materials close to where they are needed without losing reorder visibility.
You need to set up their environment.
Which kind of production type should you implement?
- A. Discrete manufacturing
- B. Manufacturing execution
- C. Process manufacturing
- D. Lean manufacturing
Answer: D
Explanation:
Explanation
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/lean-manufacturing-overview
NEW QUESTION # 103
......
The MB-320 exam is a valuable certification for professionals who are looking to enhance their supply chain and manufacturing management capabilities. Microsoft Dynamics 365 Supply Chain Management, Manufacturing certification demonstrates their expertise in implementing Microsoft Dynamics 365 Supply Chain Management and Manufacturing functionalities, and their ability to design and implement different strategies to optimize the manufacturing process. The MB-320 certification is highly sought after by employers and can open up new career opportunities and higher earning potential for certified professionals.
MB-320 Exam Dumps, MB-320 Practice Test Questions: https://www.pass4sures.top/Microsoft-Dynamics-365/MB-320-testking-braindumps.html
Free MB-320 Study Guides Exam Questions and Answer: https://drive.google.com/open?id=1s9DrJC5hBxv-kNioR79I2JLdrdT8QbGx